HIKVISION DS-K1T321 Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Touch terminals
  5. DS-K1T321 Series
  6. User manual

HIKVISION DS-K1T321 Series User Manual

Face recognition terminal
Hide thumbs Also See for DS-K1T321 Series:
Table of Contents

Advertisement

Quick Links

DS-K1T321 Series Face Recognition Terminal
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-K1T321 Series and is the answer not in the manual?

Questions and answers

Elvis Kakah
May 5, 2025

How do I check my face terminal's verification code (Hik-vision)

0
1 comments:
Mr. Anderson
May 18, 2025

To check the verification code on the HIKVISION DS-K1T321 Series face terminal, follow these steps:

1. On the login page, click "Forget Password."
2. Select "Verification Mode" and choose "E-mail Verification."
3. Export the QR code from the device.
4. Send the QR code as an attachment to pw_recovery@hikvision.com.
5. You will receive a verification code within 5 minutes in your reserved email.
6. Enter the received code into the verification code field on the device to verify your identity.

This answer is automatically generated

0

Subscribe to Our Youtube Channel

Related Manuals for HIKVISION DS-K1T321 Series

Summary of Contents for HIKVISION DS-K1T321 Series

  • Page 1 DS-K1T321 Series Face Recognition Terminal User Manual...
  • Page 2 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 3 During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method;...
  • Page 4 DS-K1T321 Series Face Recognition Terminal User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury.
  • Page 5 DS-K1T321 Series Face Recognition Terminal User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 6 DS-K1T321 Series Face Recognition Terminal User Manual under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
  • Page 7 DS-K1T321 Series Face Recognition Terminal User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions: Dangers: Neglecting any of the warnings may cause serious injury or death.
  • Page 8 DS-K1T321 Series Face Recognition Terminal User Manual Cautions: At the time of final installation, the user needs to be informed in an obvious position that the ● device has a face collection function. Do not drop the device or subject it to physical shock, and do not expose it to high ●...
  • Page 9 DS-K1T321 Series Face Recognition Terminal User Manual Available Models Product Name Model Wireless Face Recognition Terminal DS-K1T321MFX 13.56 MHz Card Presenting Frequency DS-K1T321MWX 13.56 MHz Card Presenting Frequency, Wi-Fi, 2.4G DS-K1T321MFWX 13.56 MHz Card Presenting Frequency, Wi-Fi, 2.4G DS-K1T321EX 125 KHz Card Presenting...

  • Page 10: Table Of Contents

    DS-K1T321 Series Face Recognition Terminal User Manual Contents Chapter 1 Overview ........................1 1.1 Overview ..........................1 1.2 Features ..........................1 Chapter 2 Appearance ........................ 2 Chapter 3 Installation ......................... 4 3.1 Installation Environment ......................4 3.2 Install with Gang Box ......................4 3.3 Install with Battery Plate ......................
  • Page 11 DS-K1T321 Series Face Recognition Terminal User Manual 7.1.1 Login by Activation Password ..................23 7.1.2 Login by Administrator ....................23 7.1.3 Forgot Password ......................24 7.2 Communication Settings ...................... 24 7.2.1 Set Wired Network Parameters .................. 25 7.2.2 Set Wi-Fi Parameters ....................25 7.2.3 Set ISUP Parameters ....................
  • Page 12 DS-K1T321 Series Face Recognition Terminal User Manual 7.5.4 Set Manual and Auto Attendance via Device .............. 44 7.6 Attendance Report ....................... 45 7.7 Data Management ....................... 45 7.7.1 Delete Data ......................... 45 7.7.2 Import Data ......................... 46 7.7.3 Export Data ......................... 46 7.8 Identity Authentication ......................
  • Page 13 DS-K1T321 Series Face Recognition Terminal User Manual 8.4.9 Face Parameters Settings .................... 70 8.4.10 Set Time and Attendance via Mobile Web Browser ..........71 8.4.11 Set Privacy Parameters ....................75 8.4.12 Password Mode ......................75 8.4.13 Upgrade and Maintenance ..................76 8.4.14 View Online Document .....................
  • Page 14 DS-K1T321 Series Face Recognition Terminal User Manual 10.6.9 Set Video Parameters ....................90 10.6.10 Set Image Parameters ..................... 91 10.6.11 Access Control Settings ................... 91 10.6.12 Card Settings ......................95 10.6.13 Time and Attendance Settings ................96 10.6.14 Local Time and Attendance Settings ............... 99 10.6.15 Set Privacy Parameters ..................

  • Page 15: Chapter 1 Overview

    DS-K1T321 Series Face Recognition Terminal User Manual Chapter 1 Overview 1.1 Overview Face recognition terminal is a kind of access control device for face recognition, which is mainly applied in security access control systems, such as logistic centers, airports, university campuses, alarm centrals, dwellings, etc.

  • Page 16: Chapter 2 Appearance

    DS-K1T321 Series Face Recognition Terminal User Manual Chapter 2 Appearance Figure 2-1 Appearance Table 2-1 Appearance Description Name USB Interface Fingerprint Module Note Only devices that support the fingerprint function contain a fingerprint module. Keypad Screen Camera Screw Hole Battery Interface...
  • Page 17 DS-K1T321 Series Face Recognition Terminal User Manual Name Note You can access battery box to the interface. Battery box is not supplied. You can purchase it seperately. Debugging Port (For Debugging Only) Wiring Terminal (Including Power Supply Interface) Tamper Network Interface...

  • Page 18: Chapter 3 Installation

    DS-K1T321 Series Face Recognition Terminal User Manual Chapter 3 Installation 3.1 Installation Environment Indoor use only. ● Avoid backlight, direct sunlight, and indirect sunlight. ● For better recognition, there should be light source in or near the installation environment. ●...
  • Page 19 DS-K1T321 Series Face Recognition Terminal User Manual 2. Secure the mounting plate on the gang box with two supplied screws (SC-KA4X25). Route the cable through the cable hole, wire the cables and insert the cables in the gang box. Figure 3-2 Install Mounting Plate 3.

  • Page 20: Install With Battery Plate

    DS-K1T321 Series Face Recognition Terminal User Manual Figure 3-3 Secure Device 3.3 Install with Battery Plate Steps 1. Make sure the gang box is installed on the wall.
  • Page 21 DS-K1T321 Series Face Recognition Terminal User Manual Figure 3-4 Install Gang Box Note Gang box and battery plate are not supplied. You can purchase separately. 2. Secure the battery plate on the gang box with two supplied screws (SC-KA4X25). Route the cable...
  • Page 22 DS-K1T321 Series Face Recognition Terminal User Manual Figure 3-5 Install Mounting Plate 3. Align the device with the mounting plate, and secure the device on the battery plate with 1 supplied screw (SC-CM4X14-5T10-SUSS).
  • Page 23 DS-K1T321 Series Face Recognition Terminal User Manual Figure 3-6 Hang Device...

  • Page 24: Chapter 4 Wiring

    DS-K1T321 Series Face Recognition Terminal User Manual Chapter 4 Wiring You can connect the NC/NO and COM terminal with the door lock, connect the SEN and GND terminal with the door contact and the BTN/GND terminal with the exit button.
  • Page 25 DS-K1T321 Series Face Recognition Terminal User Manual Figure 4-1 Wiring Terminal Description Note Do not wire the device to the electric supply directly. ● When connecting door contact and exit button, the device should use the same common ground ●...

  • Page 26: Wire Secure Door Control Unit

    DS-K1T321 Series Face Recognition Terminal User Manual 4.2 Wire Secure Door Control Unit You can connect the terminal with the secure door control unit. The wiring diagram is as follows. Figure 4-2 Secure Door Control Unit Wiring Note The secure door control unit should connect to an external power supply separately. The ●...

  • Page 27: Chapter 5 Activation

    DS-K1T321 Series Face Recognition Terminal User Manual Chapter 5 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported.

  • Page 28: Activate Via Mobile Web

    DS-K1T321 Series Face Recognition Terminal User Manual password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.

  • Page 29: Activate Via Web Browser

    Get the SADP software from the supplied disk or the official website http:// ● www.hikvision.com/en/ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet.
  • Page 30 DS-K1T321 Series Face Recognition Terminal User Manual Steps 1. Run the SADP software and search the online devices. 2. Find and select your device in online device list. 3. Input new password (admin password) and confirm the password. Caution STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 31: Activate Device Via Ivms-4200 Client Software

    DS-K1T321 Series Face Recognition Terminal User Manual 5.5 Activate Device via iVMS-4200 Client Software For some devices, you are required to create the password to activate them before they can be added to the iVMS-4200 software and work properly. Steps Note This function should be supported by the device.

  • Page 32: Chapter 6 Quick Operation

    DS-K1T321 Series Face Recognition Terminal User Manual Chapter 6 Quick Operation 6.1 Select Language You can select a language for the device system. After the device activation, you can select a language for the device system. Figure 6-1 Select System Language By default, the system language is English.

  • Page 33: Set Network Parameters

    DS-K1T321 Series Face Recognition Terminal User Manual Change via Security Questions If you need to change password via security questions, you can set security questions on Web. Press ESC. Note You can only select one type to change password. If you need, you can enter the web page to set both of the changing types.

  • Page 34: Access To Platform

    DS-K1T321 Series Face Recognition Terminal User Manual If disable DHCP, you should set the IP address, the subnet mask, and the gateway. Wi-Fi Select a Wi-Fi and enter the Wi-Fi's password to get connected. Or select Add Wi-Fi and enter the Wi-Fi's name and the password to get connected.

  • Page 35: Set Administrator

    DS-K1T321 Series Face Recognition Terminal User Manual If you enable this function, you can save the picture when Authenticating to the device. Save Registered Pic. (Save Registered Picture) The registered face picture will be saved to the system if you enable the function.
  • Page 36 DS-K1T321 Series Face Recognition Terminal User Manual : Press your finger according to the instructions on the device screen. Press OK to confirm. : Enter the card No. or present card on the card presenting area. Press OK to confirm.

  • Page 37: Chapter 7 Basic Operation

    DS-K1T321 Series Face Recognition Terminal User Manual Chapter 7 Basic Operation 7.1 Login Login the device to set the device basic parameters. 7.1.1 Login by Activation Password You should login the system before other device operations. If you do not configure an administrator, you should follow the instructions below to login.

  • Page 38: Forgot Password

    DS-K1T321 Series Face Recognition Terminal User Manual Figure 7-1 Admin Login 2. Authenticate the administrator's face, fingerprint or card to enter the home page. Note The device will be locked for 30 minutes after 5 failed fingerprint or card attempts.

  • Page 39: Set Wired Network Parameters

    DS-K1T321 Series Face Recognition Terminal User Manual 7.2.1 Set Wired Network Parameters You can set the device wired network parameters, including the IP address, the subnet mask, the gateway, and DNS parameters. Steps 1. Select System Settings → Comm. (Communication) to enter the Communication settings page.

  • Page 40: Set Isup Parameters

    DS-K1T321 Series Face Recognition Terminal User Manual 1. Select System Settings → Comm. (Communication) to enter the Communication settings page. 2. On the Communication settings page, select Wi-Fi. Figure 7-3 Wi-Fi Settings 3. Enable the Wi-Fi function. 4. Select a Wi-Fi from the list, and enter the Wi-Fi's password. Tap OK.
  • Page 41 DS-K1T321 Series Face Recognition Terminal User Manual Figure 7-4 ISUP Settings 2. Enable the ISUP function and set the ISUP server parameters. ISUP Version Set the ISUP version according to your actual needs. Central Group Enable central group and the data will be uploaded to the center group.

  • Page 42: Platform Access

    DS-K1T321 Series Face Recognition Terminal User Manual If you choose V5.0, you should create an account and ISUP key. If you choose other version, you should create an ISUP account only. Note Remember the ISUP account and ISUP key. You should enter the account name or the key ●...

  • Page 43: Set Ap Mode

    DS-K1T321 Series Face Recognition Terminal User Manual 7.2.6 Set AP Mode You can enable AP mode, and add the device to Hik-Connect to set network. Steps 1. Select System Settings → Comm. (Communication Settings) on the Home page to enter the Communication Settings page.

  • Page 44: Add Face Picture

    DS-K1T321 Series Face Recognition Terminal User Manual Note The employee ID should be less than 32 characters. And it can be a combination of lower ● letters, upper letters, and numbers. The employee ID should not be duplicated. ● 4. Select the Name field and input the user name on the keyboard.
  • Page 45 DS-K1T321 Series Face Recognition Terminal User Manual Steps Note Up to 500 face pictures can be added. 1. Long press OK and login the device. 2. Select User → Add User to enter the Add User page. 3. Edit the employee ID.

  • Page 46: Add Fingerprint

    DS-K1T321 Series Face Recognition Terminal User Manual Note Make sure your face picture is in the face picture outline when adding the face picture. ● Make sure the captured face picture is in good quality and is accurate. ● For details about the instructions of adding face pictures, see Tips When Collecting/ ●...

  • Page 47: Add Card

    DS-K1T321 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ● name. The suggested user name should be within 128 characters. ● 5. Select the Fingerprint field to enter the Fingerprint page.

  • Page 48: View Pin Code

    DS-K1T321 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ● name. The suggested user name should be within 128 characters. ● 5. Select the Card field and press OK to enter the Add Card page.

  • Page 49: Set Authentication Mode

    DS-K1T321 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ● name. The suggested user name should be within 128 characters. ● 5. Select the PIN code and create a PIN for the user.

  • Page 50: Local Time And Attendance

    DS-K1T321 Series Face Recognition Terminal User Manual Edit User On the User Management page, select a user from the User List to enter the User Information page. Follow the steps in User Management to edit the user parameters. Press ESC to save the settings.

  • Page 51: Enable Local T&A

    DS-K1T321 Series Face Recognition Terminal User Manual Figure 7-7 Add Department Note The department name supports uppercase English, lowercase English, numbers and symbols. ● Up to 32 characters can be entered in department name. ● There are 7 departments in the department management by default.

  • Page 52: Shift Management

    DS-K1T321 Series Face Recognition Terminal User Manual 7.4.4 Shift Management Set Attendance Rule for Shift Set attendance rule before setting shift. Select Local T&A → T&A → Shift Management → Attendance Rule to enter the page. Figure 7-8 Attendance Rule Set the attendance rule, including Mark as Later if Checks in Late For and Mark as Early Leave if Checks out Early For.
  • Page 53 DS-K1T321 Series Face Recognition Terminal User Manual Set the Mark as Later if Checks in Late For time. For example, set the off work time as 17:30 and set the parameter as 30 min, the latest check out time will be 18:00. Checking out at or later than 18:01 will be marked as invalid.

  • Page 54: Shift Schedule

    DS-K1T321 Series Face Recognition Terminal User Manual Note If the attendance rules conflict with the normal shift period, the device will prompt "Incorrect ● Time Duration". Delete all configured time durations and reset after exiting. The shift name supports numbers, uppercase letters, lowercase letters, Chinese characters ●...

  • Page 55: Platform Attendance

    DS-K1T321 Series Face Recognition Terminal User Manual Steps 1. Select Local T&A → T&A → Schedule to enter the Shift Schedule by Department page. 2. Select Add Shift Schedule. 3. Select the Department/Person, select the person. For details, see User Management .

  • Page 56: Set Manual Attendance Via Device

    DS-K1T321 Series Face Recognition Terminal User Manual You will not view or configure the attendance status on the initial page. And the system will follow the attendance rule that configured on the platform. 7.5.2 Set Manual Attendance via Device Set the attendance mode as manual, and you should select a status manually when you take attendance.

  • Page 57: Set Auto Attendance Via Device

    DS-K1T321 Series Face Recognition Terminal User Manual Note If you do not select a status, the authentication will be failed and it will not be marked as a valid attendance. 7.5.3 Set Auto Attendance via Device Set the attendance mode as auto, and you can set the attendance status and its available schedule.

  • Page 58: Set Manual And Auto Attendance Via Device

    DS-K1T321 Series Face Recognition Terminal User Manual 3) Set the selected attendance status's start time of the day. 4) Press OK. 5) Repeat step 1 to 4 according to your actual needs. Note The attendance status will be valid within the configured schedule.

  • Page 59: Attendance Report

    DS-K1T321 Series Face Recognition Terminal User Manual 3. Enable the Attendance Status Required function. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required.

  • Page 60: Import Data

    DS-K1T321 Series Face Recognition Terminal User Manual On the Home page, select Data → Delete Data → User Data . All user data added in the device will be deleted. 7.7.2 Import Data Steps 1. Plug a USB flash drive in the device.

  • Page 61: Identity Authentication

    DS-K1T321 Series Face Recognition Terminal User Manual 4. Optional: Create a password for exporting. When you import those data to another device, you should enter the password. Note The supported USB flash drive format is DB. ● The system supports the USB flash drive with the storage of 1G to 32G. Make sure the free ●...

  • Page 62: Basic Settings

    DS-K1T321 Series Face Recognition Terminal User Manual Steps 1. If the authentication mode is Card and Face, Password and Face, Card and Password, Card and Face and Fingerprint, authenticate any credential according to the instructions on the live view page.

  • Page 63: Password Management

    DS-K1T321 Series Face Recognition Terminal User Manual Sleeping (s) Set the device sleeping waiting time (s). For example, when you are on the initial page and if you set the sleeping time to 30 s, the device will sleep after 30 s without any operation.

  • Page 64: Set Biometric Parameters

    DS-K1T321 Series Face Recognition Terminal User Manual 7.11 Set Biometric Parameters You can customize the face parameters to improve the face recognition performance. The configurable parameters includes face liveness level, face recognition distance, face recognition interval, face 1:N security level, face 1:1 security level and face with mask detection.

  • Page 65: Set Access Control Parameters

    DS-K1T321 Series Face Recognition Terminal User Manual 7.12 Set Access Control Parameters You can set the access control permissions, including the functions of authentication mode, enable NFC card, enable M1 card, door contact, open duration (s) and authentication interval (s).
  • Page 66 DS-K1T321 Series Face Recognition Terminal User Manual Parameter Description Note Only the device with the fingerprint module supports the ● fingerprint related function. Biometric recognition products are not completely applicable ● to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.

  • Page 67: Preference Settings

    DS-K1T321 Series Face Recognition Terminal User Manual 7.13 Preference Settings You can configure preference settings parameters. Steps 1. Select System Settings → Preference to enter the preference settings page. Theme You can set the theme of the prompt window on the authentication page. You can select Theme as Authentication/Simple.
  • Page 68 DS-K1T321 Series Face Recognition Terminal User Manual Figure 7-17 Maintenance Page System Information You can view the device information including device model, serial No., firmware version, MAC address, production data and open source code license. Note The page may vary according to different device models. Refers to the actual page for details.
  • Page 69 DS-K1T321 Series Face Recognition Terminal User Manual If the device has been connected to Hik-Connect and network, when there is a new installation package in Hik-Connect, you can select Device Upgrade → Online Update to upgrade the device system. Update via USB Plug the USB flash drive in the device USB interface.

  • Page 70: Chapter 8 Configure The Device Via The Mobile Browser

    DS-K1T321 Series Face Recognition Terminal User Manual Chapter 8 Configure the Device via the Mobile Browser 8.1 Login You can login via mobile browser. Note Parts of the model supports Wi-Fi settings. ● Make sure the device is activated. ●...

  • Page 71: Forget Password

    Answer the security questions. E-mail Verification 1. Export the QR code and send it to pw_recovery@hikvision.com as attachment. 2. You will receive a verification code within 5 minutes in your reserved email. 3. Enter the verification code into the verification code field to verify your identification.

  • Page 72: Set Dst

    DS-K1T321 Series Face Recognition Terminal User Manual Figure 8-1 Time Settings Tap Save to save the settings. Time Zone Select the time zone where the device is located from the drop-down list. Time Sync. Mode Manual By default, the device time should be synchronized manually. You can set the device time manually.

  • Page 73: User Management

    DS-K1T321 Series Face Recognition Terminal User Manual Figure 8-2 DST 2. Tap Enable DST. 3. Set the start time, end time, and DST bias. 4. Tap Save. 8.4.4 User Management Steps 1. Tap → User Management → User Management → admin to enter the setting page.
  • Page 74 DS-K1T321 Series Face Recognition Terminal User Manual → Communication Settings → Wired Network to enter the configuration page. DHCP If you disable the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway, Mac address, and MTU, Mac address, MTU.
  • Page 75 DS-K1T321 Series Face Recognition Terminal User Manual Figure 8-3 Wi-Fi...
  • Page 76 DS-K1T321 Series Face Recognition Terminal User Manual 3. Add Wi-Fi. 1) Tap Add Wi-Fi. 2) Enter Wi-Fi Name and Wi-Fi Password, and select Encryption Type. 3) Tap Save. 4. Select the Wi-Fi name, and tap Connect. 5. Enter the password and tap Save.

  • Page 77: User Management

    DS-K1T321 Series Face Recognition Terminal User Manual Note 6 to 12 letters (a to z, A to Z) or numbers (0 to 9), case sensitive. You are recommended to use ● a combination of no less than 8 letters or numbers.

  • Page 78: Search Event

    DS-K1T321 Series Face Recognition Terminal User Manual Name Enter your name. The name supports numbers, uppercase and lowercase English, and characters. The name is recommended to be within 32 characters. Long-Term Effective User Set the user permission as long-term effective.
  • Page 79 DS-K1T321 Series Face Recognition Terminal User Manual Steps 1. Tap → Access Control → Authentication Settings . Figure 8-4 Authentication Settings 2. Tap Save. Terminal Select terminal for settings. Terminal Type/Terminal Model Get terminal description. They are read-only. Enable Authentication Device Enable the authentication function.
  • Page 80 DS-K1T321 Series Face Recognition Terminal User Manual Select an authentication mode according to your actual needs from the drop-down list. Continuous Face Recognition Interval (s) You can set the interval between 2 continuous recognition of a same person during the authentication.
  • Page 81 DS-K1T321 Series Face Recognition Terminal User Manual Figure 8-5 Door Parameters Settings Page Tap Save to save the settings after the configuration. Name You can create a name for the door. Open Duration Set the door unlocking duration. If the door is not opened for the set time, the door will be locked.
  • Page 82 DS-K1T321 Series Face Recognition Terminal User Manual Set the door open duration when first person is in. After the first person is authorized, it allows multiple persons access the door or other authentication actions. Door Open Timeout Alarm An alarm will be triggered if the door has not been closed within the configured time duration.
  • Page 83 DS-K1T321 Series Face Recognition Terminal User Manual Enable M1 card and authenticating by presenting M1 card is available. M1 Card Encryption M1 card encryption can improve the security level of authentication. Sector Enable the function and set the encryption sector. By default, Sector 13 is encrypted. It is recommended to encrypt sector 13.

  • Page 84: Face Parameters Settings

    DS-K1T321 Series Face Recognition Terminal User Manual Note If you select Access Controller: If connect the device to a terminal via the RS-485 interface, set the RS-485 address as 2. If you connect the device to a controller, set the RS-485 address according to the door No.

  • Page 85: Set Time And Attendance Via Mobile Web Browser

    DS-K1T321 Series Face Recognition Terminal User Manual Fingerprint Parameters → Smart → Fingerprint Parameters . Fingerprint Security Level You can set the security level of fingerprint. The higher the security level you set, the lower the False Acceptance Rate (FAR) will be. The higher the security level you set, the lower the False Rejection Rate (FRR) will be.
  • Page 86 DS-K1T321 Series Face Recognition Terminal User Manual Manage Department via Mobile Web Browser You can add, edit and delete the department. Steps 1. Tap → Department Management to enter the settings page. 2. Add the department. 1) Tap +. 2) Enter the department name, and tap OK.
  • Page 87 DS-K1T321 Series Face Recognition Terminal User Manual Set the Mark as Later if Checks in Late For time. For example, set the off work time as 17:30 and set the parameter as 30 min, the latest check out time will be 18:00. Checking out at or later than 18:01 will be marked as invalid.
  • Page 88 DS-K1T321 Series Face Recognition Terminal User Manual Manage Shift Schedule by Department via Mobile Web Browser All persons in the department use the same shift schedule to take attendance. Before You Start Edit the department. You can refer to Manage Department via Mobile Web Browser for details.

  • Page 89: Set Privacy Parameters

    DS-K1T321 Series Face Recognition Terminal User Manual 8.4.11 Set Privacy Parameters Set the display settings, picture upload and storage parameters. → Configuration → Security → Privacy Settings . Authentication Settings Picture Display/Name Display/Employee ID You can tap to enable Picture, Name, or Employee ID to display. When authentication is completed, the system will display the selected contents in the result.

  • Page 90: Upgrade And Maintenance

    DS-K1T321 Series Face Recognition Terminal User Manual Platform-Applied Personal PIN It can be created or edited on the platform, and issued to the device before it can be used. It cannot be set on the device or on the web.

  • Page 91: Chapter 9 Quick Operation Via Web Browser

    DS-K1T321 Series Face Recognition Terminal User Manual Chapter 9 Quick Operation via Web Browser 9.1 Select Language You can select a language for the device system. Click in the top right of the web page to enter the Device Language Settings page. You can select a language for the device system from the drop-down list.

  • Page 92: Privacy Settings

    DS-K1T321 Series Face Recognition Terminal User Manual By default, the device time should be synchronized manually. You can set the device time manually or check Sync. with Computer Time to synchronize the device time with the computer's time. Server Address Type/Server Address/NTP Port/Interval You can set the server address type, server address, NTP port, and interval.

  • Page 93: And System Network

    DS-K1T321 Series Face Recognition Terminal User Manual 1) Click Add Face to upload a face picture from local storage. Note The uploaded picture should be within 200 K, in JPG、JPEG、PNG format. 2) Click Add Card to enter the Card No. and select the property of the card.

  • Page 94: Chapter 10 Operation Via Web Browser

    Answer the security questions. E-mail Verification 1. Export the QR code and send it to pw_recovery@hikvision.com as attachment. 2. You will receive a verification code within 5 minutes in your reserved email. 3. Enter the verification code into the verification code field to verify your identification.
  • Page 95 DS-K1T321 Series Face Recognition Terminal User Manual Figure 10-1 Live View Page Function Descriptions: Door Status Click to view the device live view. Set the volume when starting live view. Note If you adjust the volume when starting two-way audio, you may hear a repeated sounds.

  • Page 96: Person Management

    DS-K1T321 Series Face Recognition Terminal User Manual You can view the event Employee ID, Name, Card No., Event Type, Time, and Operation. You can also click View More to enter the search conditions, including the event type, employee ID, the name, the card No., the start time, and the end time, and click Search.

  • Page 97: Search Event

    DS-K1T321 Series Face Recognition Terminal User Manual Add Face Picture Click Person Management → Add to enter the Add Person page. Click + Upload to upload a face picture from the local PC. Note The picture format should be JPG or JPEG or PNG, and the size should be less than 200 kb.

  • Page 98: Configuration

    DS-K1T321 Series Face Recognition Terminal User Manual 10.6 Configuration 10.6.1 Set Local Parameters Set the live view parameters, picture and clip settings. Set Live View Parameters Click Configuration → Local to enter the Local page. Configure the stream type, the play performance, auto start Live View and click Save.

  • Page 99: Set Dst

    DS-K1T321 Series Face Recognition Terminal User Manual You should set the NTP server's IP address, port No., and interval. Manual By default, the device time should be synchronized manually. You can set the device time manually or check Sync. with Computer Time to synchronize the device time with the computer's time.

  • Page 100: Account Security Settings

    DS-K1T321 Series Face Recognition Terminal User Manual three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product.
  • Page 101 DS-K1T321 Series Face Recognition Terminal User Manual Figure 10-4 TCP/IP Settings Page Set the parameters and click Save to save the settings. NIC Type Select a NIC type from the drop-down list. By default, it is Auto. DHCP If uncheck the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway, Mac address, and MTU.
  • Page 102 DS-K1T321 Series Face Recognition Terminal User Manual Figure 10-5 Wi-Fi Settings Page 2. Check Wi-Fi. 3. Select a Wi-Fi - Click Connect of a Wi-Fi in the list and enter the Wi-Fi password. - Click Manual Add and enter a Wi-Fi's SSID, working mode, security mode, and password. Click 4.
  • Page 103 DS-K1T321 Series Face Recognition Terminal User Manual It refers to the port through which the browser accesses the device. For example, when the HTTP Port is modified to 81, you need to enter http://192.0.0.65:81 in the browser for login. HTTPS Set the HTTPS for accessing the browser.

  • Page 104: Set Video Parameters

    DS-K1T321 Series Face Recognition Terminal User Manual Note After adding the device to APP, you need to enter the video encryption password to live view the device. 6. Optional: Click View to view the device QR code. Scan the QR code to account.

  • Page 105: Set Image Parameters

    DS-K1T321 Series Face Recognition Terminal User Manual Note The functions vary according to different models. Refers to the actual device for details. 10.6.10 Set Image Parameters You can adjust the image parameters, video parameters, supplement parameters and capture interval. Steps 1.
  • Page 106 DS-K1T321 Series Face Recognition Terminal User Manual Click Save to save the settings after the configuration. If select Terminal Main: Terminal/Terminal Type/Terminal Model Select terminal and get the terminal description. They are read-only. Enable Authentication Device Enable the authentication function.
  • Page 107 DS-K1T321 Series Face Recognition Terminal User Manual Enable to report alarm when the card reading attempts reach the set value. Communication with Controller Every When the access control device cannot connect with the card reader for longer than the set time, the card reader will turn offline automatically.
  • Page 108 DS-K1T321 Series Face Recognition Terminal User Manual Open Duration Set the door unlocking duration. If the door is not opened for the set time, the door will be locked. Door Open Timeout Alarm An alarm will be triggered if the door has not been closed within the configured time duration.

  • Page 109: Card Settings

    DS-K1T321 Series Face Recognition Terminal User Manual Set RS-485 Parameters You can set the RS-485 parameters including the peripheral, address, baud rate, etc. Click Configuration → Access Control → RS-485 . Check Enable, and set the parameters. Peripheral Type Select a peripheral from the drop-down list according the actual situation. You can select from Card Reader, Extension Module, or Access Controller.

  • Page 110: Time And Attendance Settings

    DS-K1T321 Series Face Recognition Terminal User Manual M1 Card Encryption Sector M1 card encryption can improve the security level of authentication. Enable the function and set the encryption sector. By default, Sector 13 is encrypted. It is recommended to encrypt sector 13.
  • Page 111 DS-K1T321 Series Face Recognition Terminal User Manual Steps 1. Click Configuration → Platform Attendance to enter the settings page. 2. Disable the Time and Attendance. Result You will not view or configure the attendance status on the initial page. And the system will follow the attendance rule that configured on the platform.
  • Page 112 DS-K1T321 Series Face Recognition Terminal User Manual Note If you do not select a status, the authentication will be failed and it will not be marked as a valid attendance. Set Auto Attendance via Web Set the attendance mode as auto, and you can set the attendance status and its available schedule.

  • Page 113: Local Time And Attendance Settings

    DS-K1T321 Series Face Recognition Terminal User Manual Result On the initial page and authenticate. The authentication will be marked as the configured attendance status according to the schedule. If you tap the edit icon on the result tab, you can select a status to take attendance manually, the authentication will be marked as the edited attendance status.
  • Page 114 DS-K1T321 Series Face Recognition Terminal User Manual Figure 10-8 Attendance Rule Example Mark as Early Leave if Checks out Early For Set the Mark as Early Leave if Checks out Early For time. For example, set the off work time as 17:30 and set the parameter as 10 min, the earliest check out time will be 17:20.
  • Page 115 DS-K1T321 Series Face Recognition Terminal User Manual Manage Flexible Shift via Web You can set fixed work duration and flexible on-work and off-work time of person for attendance check.. Steps 1. Click Configuration → Time and Attendance → Schedule → Shift Management .

  • Page 116: Set Privacy Parameters

    DS-K1T321 Series Face Recognition Terminal User Manual Steps 1. Click Time and Attendance → Schedule to enter the Shift Schedule page. 2. Click Add Schedule. 3. Set Schedule Name. 4. Click Add to select the Department/Person, and select the person. For details, see Person Management .
  • Page 117 DS-K1T321 Series Face Recognition Terminal User Manual Drag the block or enter number to set the period for event deleting. All events will be deleted according to the configured time duration. Delete Old Events by Specified Time Set a time and all events will be deleted on the configured time.

  • Page 118: Set Password Mode

    DS-K1T321 Series Face Recognition Terminal User Manual 10.6.16 Set Password Mode Before configuring passwords, it is necessary to clarify whether the password is a device-set personal PIN or a platform-applied personal PIN. If it is a device-set personal PIN, it can be created or edited on the device or on the web, and cannot be set on other platforms;...
  • Page 119 DS-K1T321 Series Face Recognition Terminal User Manual Pitch Angle The maximum pitch angle when starting face authentication. Yaw Angle The maximum yaw angle when starting face authentication. 1:1 Matching Threshold Set the matching threshold when authenticating via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate.

  • Page 120: Set Preference

    DS-K1T321 Series Face Recognition Terminal User Manual Set Recognition Area Click Configuration → Smart → Area Configuration . Drag the yellow frame in the live video to adjust the recognition area. Only the face within the area can be recognized by the system.
  • Page 121 DS-K1T321 Series Face Recognition Terminal User Manual Restore Parameters Click Maintenance and Security → Maintenance → Backup and Reset . Restore All All parameters will be restored to the factory settings. You should activate the device before usage. Restore The device will restore to the default settings, except for the device IP address and the user information.

  • Page 122: Device Debugging

    DS-K1T321 Series Face Recognition Terminal User Manual Version Information You can view the device information. 10.6.20 Device Debugging You can set device debugging parameters. Steps 1. Click Maintenance and Security → Maintenance → Device Debugging . 2. You can set the following parameters.

  • Page 123: Certificate Management

    DS-K1T321 Series Face Recognition Terminal User Manual 10.6.23 Certificate Management It helps to manage the server/client certificates and CA certificate. Note The function is only supported by certain device models. Create and Install Self-signed Certificate Steps 1. Go to Maintenance and Security → Security → Certificate Management .
  • Page 124 DS-K1T321 Series Face Recognition Terminal User Manual Steps 1. Go to Maintenance and Security → Security → Certificate Management . 2. Create an ID in the Import CA Certificate area. Note The input certificate ID cannot be the same as the existing ones.

  • Page 125: Chapter 11 Other Platforms To Configure

    DS-K1T321 Series Face Recognition Terminal User Manual Chapter 11 Other Platforms to Configure You can also configure the device via iVMS-4200 Client Software or HikCentral Access Control. For details, see the platforms' user manual. iVMS-4200 Client Software Click/tap the link to view the client software's user manual.

  • Page 126: Appendix A. Tips For Scanning Fingerprint

    DS-K1T321 Series Face Recognition Terminal User Manual Appendix A. Tips for Scanning Fingerprint Recommended Finger Forefinger, middle finger or the third finger. Correct Scanning The figure displayed below is the correct way to scan your finger: You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center.
  • Page 127 DS-K1T321 Series Face Recognition Terminal User Manual Environment The scanner should avoid direct sun light, high temperature, humid conditions and rain. When it is dry, the scanner may not recognize your fingerprint successfully. You can blow your finger and scan again.

  • Page 128: Appendix B. Tips When Collecting/Comparing Face Picture

    DS-K1T321 Series Face Recognition Terminal User Manual Appendix B. Tips When Collecting/Comparing Face Picture The position when collecting or comparing face picture is as below: Positions (Recommended Distance: 0.5 m) Expression Keep your expression naturally when collecting or comparing face pictures, just like the ●...
  • Page 129 DS-K1T321 Series Face Recognition Terminal User Manual Size Make sure your face is in the middle of the collecting window.

  • Page 130: Appendix C. Tips For Installation Environment

    DS-K1T321 Series Face Recognition Terminal User Manual Appendix C. Tips for Installation Environment 1. Light Source Illumination Reference Value Candle: 10Lux Bulb: 100~850Lux Sunlight: More than 1200Lux 2. Avoid backlight, direct and indirect sunlight...

  • Page 131: Appendix D. Dimension

    DS-K1T321 Series Face Recognition Terminal User Manual Appendix D. Dimension Figure D-1 Dimension...
  • Page 132 UD30751B-B...

This manual is also suitable for:

Ds-k1t321efwxDs-k1t321mfxDs-k1t321mxDs-k1t321mfwxDs-k1t321exDs-k1t321mwx ... Show all

Table of Contents

Save PDF