Beckhoff CP62 Series Manual
Hide thumbs
Also See for CP62 Series:
- Installation and operating instructions manual (26 pages) ,
- Installation and operating instructions manual (30 pages) ,
- Installation and operating instructions manual (27 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Beckhoff CP62 Series
Summary of Contents for Beckhoff CP62 Series
- Page 1 Manual | EN CP62xx Panel PC 2025-03-28 | Version: 2.0...
-
Page 3: Table Of Contents
4.3.3 Connecting cables and power supply ................ 41 Switching the panel PC on and off .................... 42 5 Configuration............................ 44 Beckhoff Device Manager ....................... 44 UPS configuration ........................... 45 6 Decommissioning ........................... 48 Disconnecting the power supply and cables ................... 48 Disassembly and disposal....................... - Page 4 Table of contents Cleaning ............................ 50 Maintenance............................ 52 7.2.1 Replacing the battery ....................... 54 7.2.2 Replacing the storage media ................... 55 7.2.3 Replacing the fan ...................... 58 8 Troubleshooting ............................ 59 9 Technical data ............................ 60 10 Appendix .............................. 61 10.1 Service and support ........................ 61 10.2 Approvals ............................
-
Page 5: Notes On The Documentation
Copyright © Beckhoff Automation GmbH & Co. KG. Publication of this document on websites other than ours is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design. -
Page 6: For Your Safety
Exclusion of liability Beckhoff shall not be held liable in the event that this documentation is not complied with and the devices are therefore not used in line with the documented operating conditions. -
Page 7: Fundamental Safety Instructions
For your safety Fundamental safety instructions The following safety instructions must be observed when handling the device. Application conditions • Do not use the device under extreme environmental conditions. • Only use the device in hazardous areas if it is explicitly designed for this purpose. •... -
Page 8: Notes On Information Security
For your safety Notes on information security The products of Beckhoff Automation GmbH & Co. KG (Beckhoff), insofar as they can be accessed online, are equipped with security functions that support the secure operation of plants, systems, machines and networks. Despite the security functions, the creation, implementation and constant updating of a holistic security concept for the operation are necessary to protect the respective plant, system, machine and networks against cyber threats. -
Page 9: Product Overview
Table 1: Device extension options Order number Description Link to options ® C9900-B500 2 PCIe module slots https://www.beckhoff.com/cp62xx ® C9900-B504 2 PCIe plug-in card slots Select a product variant and then select the C9900-B508 2 PCI plug-in card slots "Options" tab at the bottom of the website. -
Page 10: Fig. 1 Comparison Of Device Extensions
Product overview Fig. 1: Comparison of device extensions ® For more information on the interface options provided by the PCIe module slots, please refer to chapter 3.3 Optional interfaces [} 19]. ® An overview of the PCI and PCIe plug-in cards is available here. Version: 2.0 CP62xx... -
Page 11: Structure
Product overview Structure Figure 2 shows an example of the basic configuration of a CP62xx. Fig. 2: Structure Table 2: Legend structure Component Description Clamping lever Mounting the device in the control cabinet wall Fan cartridge Optimum cooling of the inside of the device Name plate Information on the equipment of the device Connection section... -
Page 12: Interface Description
Product overview Interface description In the basic configuration, the built-in panel PC includes the following interfaces: • RS232 (X102) • DVI (X103) • USB (X104 - X107) • Ethernet (X108, X109) • Power supply (X110) The interfaces are located at the rear of the device (see fig. 3). Regardless of whether the device is equipped with module or plug-in card slots, the interfaces are located in the same place. -
Page 13: Rs232
Product overview 3.2.1 RS232 The serial interface COM1 (X102) is fed out via a 9-pin standard DSUB connector. The interface provides an asynchronous, serial communication method defined in the RS232 standard. X102 Fig. 4: RS232 interface pin numbering Table 3: RS232 interface pin numbering Name Description Data Carrier Detect... -
Page 14: Dvi
Product overview 3.2.2 The panel PC is equipped with a DVI connector (X103), to which a DVI-capable monitor can be connected. Only digital signals are transmitted. Fig. 5: DVI interface pin numbering Table 4: DVI interface pin assignment Connection Connection Connection TMDS Data 2 - TMDS Data 1 - TMDS Data 0 - TMDS Data 2 +... -
Page 15: Usb
Product overview 3.2.3 The panel PC has four USB interfaces (X104, X107). They are used to connect peripheral devices with USB interfaces. The following table shows the interface assignment based on the device generation: Table 5: USB interface device generation Device generation USB interfaces CP62xx-xxxx-0070 4x USB 3.0 (X104-X107) -
Page 16: Ethernet Rj45
Product overview 3.2.4 Ethernet RJ45 The panel PC has two Gigabit LAN ports (X108, X109). The Ethernet standards 100Base-T, 1000Base-T and 2500Base-T enable the connection of corresponding network components and data rates of 100/1000/2500 Mbit/s. The required speeds are selected automatically. The RJ45 connection technology with twisted-pair cables is used. -
Page 17: Table 9 Led Meaning: Speed 100/1000 Mbit/S
Product overview Table 9: LED meaning: speed 100/1000 Mbit/s Mbit/s Lights up orange 1000 Lights up green Table 10: LED meaning: speed 100/1000/2500 Mbit/s Mbit/s 1000 Lights up orange 2500 Lights up green CP62xx Version: 2.0... -
Page 18: Power Supply
22 V should be present at the power supply plug of the device so that the device remains switched on in the event of voltage fluctuations. The plug is included in the delivery. You can obtain a replacement plug from your Beckhoff Sales using the following ordering option: C9900-P926 Version: 2.0... -
Page 19: Optional Interfaces
® Table 12: Options PCIe modules Order number Description Link to option ® FC9062 Gigabit Ethernet PCIe module https://www.beckhoff.com/cp62xx ® C9900-E301 RS232 PCIe module Select a product variant and then select the ® C9900-E309 RS485 PCIe module "Options" tab at the bottom of the website. -
Page 20: Pcie Module Fc9062 With 2 Gigabit Ethernet Ports
Product overview ® 3.3.1 PCIe module FC9062 with 2 Gigabit Ethernet ports The Ethernet standards 100Base-T and 1000Base-T enable the connection of corresponding network components and data rates of 100/1000 Mbit/s for the two Ethernet ports of the FC9062 option connected ®... -
Page 21: Pcie ® Module C9900-E301 With 2 Serial Interfaces Rs232
Product overview ® 3.3.2 PCIe module C9900-E301 with 2 serial interfaces RS232 ® The RS232 interfaces contain two electrically isolated sockets ix Industrial type B. Two adapter cables ix ® Industrial type B to D-sub, 9-pin are required (order identifier C9900-K920). The adapter cables are 50 cm long. -
Page 22: Pcie ® Module C9900-E309 With 2 Serial Interfaces Rs485
Product overview ® 3.3.3 PCIe module C9900-E309 with 2 serial interfaces RS485 ® ® The RS485 PCIe module contains two electrically isolated ix Industrial type B sockets for asynchronous, ® serial high-speed data transmission. Two ix Industrial type B to D-sub, 9-pin adapter cables are required (order identifier C9900-K922). -
Page 23: Pcie ® Module C9900-E310 With 2 Serial Interfaces Rs422
Product overview ® 3.3.4 PCIe module C9900-E310 with 2 serial interfaces RS422 ® ® The RS422 PCIe module contains two electrically isolated ix Industrial type B sockets for high-speed serial ® data transmission. Two ix Industrial type B to D-sub, 9-pin adapter cables are required (order identifier C9900-K922). -
Page 24: Fig. 14 Usb Interface Pin Numbering
Product overview ® 3.3.5 PCIe module C9900-E277 with 2 USB 3.0 interfaces ® The USB 3.0 PCIe module includes two USB ports with a data transmission rate of up to 5 Gbit/s according to the USB 3.0 specification. Each port provides up to 1 A power supply. They are used to connect peripheral devices with USB interfaces. -
Page 25: C9900-E159 With 1 Serial Interface Rs232
Product overview 3.3.6 C9900-E159 with 1 serial interface RS232 The serial interface contains an electrically isolated socket. It is led out via a 9-pin standard DSUB connector. The interface provides an asynchronous, serial communication method defined in the RS232 standard. The channel features overvoltage protection. -
Page 26: C9900-E189 With 1 Serial Interface Rs422
Product overview Signal Type Description +5 V TxD- Data-Out - Transmit 485 RxD- Data-In - Receive 485 Not used Not used Pins 2 and 3 (data +) and pins 7 and 8 (data -) must be connected. On delivery the interface is configured as a half-duplex endpoint without echo as standard – see table below: Table 23: RS485 standard configuration Function Status... -
Page 27: C9900-E234 With 2 Usb 2.0 Interfaces
Product overview Table 25: RS422 standard configuration Function Status Echo Auto send Always send Auto receive Always receive Termination 3.3.9 C9900-E234 with 2 USB 2.0 interfaces The option includes two USB 2.0 interfaces. They are used to connect peripheral devices with USB connection. Fig. 18: USB interface pin numbering Table 26: USB interface pin assignment Connection... -
Page 28: Fig. 19 Gigabit Ethernet Pc Network Card Pin Numbering
Product overview 3.3.10 FC9071-0000 Gigabit Ethernet PC network card with 1 channel The 100Base-T and 1000Base-T Ethernet standards enable the connection of corresponding network components and data rates of 100/1000 Mbit/s. The required speed is selected automatically. The RJ45 connection technology with twisted-pair cables is used. The maximum length of the cable connection is 100 m. -
Page 29: Name Plate
Fig. 20: Name plate Table 28: Legend name plate Description Model: the last four digits indicate the device generation. Serial number = Beckhoff Traceability Number (BTN) Date of manufacture Mainboard Main memory Power supply MAC addresses of the Ethernet interfaces (X108, X109) - Page 30 Product overview Description Variant number: commercial number of the order code including ordering options Version: 2.0 CP62xx...
-
Page 31: Key Functions
Product overview Key functions Table 29: Key functions Function Move the cursor one step in the corresponding direction Home = cursor to beginning of the line Home End = cursor to end of the line Pg Up = scroll forward one page Pg Up Pg Dn Pg Dn = turn back one page... - Page 32 Product overview Function keys = functions of the keys determined by the software Special keys = special keys with LED that can be controlled by the TwinCAT automation software Einschub Einschub Einschub Einschub Streifen Streifen Streifen Streifen Version: 2.0 CP62xx...
-
Page 33: Commissioning
5. Brush away air bubbles towards the edge with a doctor blade or other object with a soft rubber or felt edge. ð The film is now fitted. You can use the Dimming, Screensaver and Cleaning mode functions with the Display Control Tool. The Beckhoff Information System provides more information about the tool: https: https://infosys.beckhoff.com/ content/1031/panelconfigurationtools/11725543179.html?id=7993182328699786200. CP62xx Version: 2.0... -
Page 34: Transport And Unpacking
Commissioning Transport and unpacking The specified storage conditions must be observed (see chapter 9 Technical data [} 60]). Despite the robust design of the unit, the components are sensitive to strong vibrations and impacts. During transport the device must therefore be protected from mechanical stress. Appropriate packaging of the device, such as the original packaging, can improve the vibration resistance during transport. -
Page 35: Control Cabinet Installation
The device is designed for installation in a control cabinet for machine and system engineering. The environmental conditions specified for operation must be observed. Dimensions The dimensions of the device can be found in the download finder on the Beckhoff website: https:// www.beckhoff.com/en-en/support/download-finder/search-result/?c-1=27833209&search=cp62xx All dimensions are in mm. -
Page 36: Fig. 21 Delivery State Clamping Lever
Commissioning Fig. 21: Delivery state clamping lever To install and secure the device in the control cabinet, follow the steps below: 1. Insert the device in the intended position in the control cabinet wall. Secure the device against falling out until it is fastened. Fig. 22: Wall positioning 2. -
Page 37: Connecting The Panel Pc
Commissioning Fig. 23: Control cabinet installation ð You have installed the device in the control cabinet. Connecting the panel PC CAUTION Risk of electric shock Dangerous touch voltages can lead to electric shock. To avoid electric shock, observe the following: • Never connect or disconnect the device cables during a thunderstorm. •... -
Page 38: Mounting Power Supply Cable
8-pin connection strip and a strain relief housing with cable tie. If you require a replacement for the voltage connector and the strain relief housing, you can order this from Beckhoff Sales under ordering option C9900-P926. Mounting power supply cable First mount the plug on the cable as follows: 1. -
Page 39: Fig. 26 Disassembly Of The Strain Relief Housing
Commissioning 1. Use your fingers to bend the latching lugs on the lower part slightly outwards. Fig. 26: Disassembly of the strain relief housing 2. Lever the upper part off the lower part. 3. Cut the cable tie. ð You have removed the strain relief housing. CP62xx Version: 2.0... -
Page 40: Grounding The Panel Pc
Commissioning 4.3.2 Grounding the panel PC Grounding or potential equalization of electronic devices minimizes potential differences and conducts electrical currents to ground. This is to prevent dangerous touch voltages and electromagnetic interference. Protective earth The protective grounding of a device serves to avoid dangerous touch voltages. According to the EN 60204-1 standard (Chapter 8 Potential equalization), protective grounding is required if: •... -
Page 41: Connecting Cables And Power Supply
You can use the UPS output of the power supply unit and connect a Beckhoff control panel as a second display. If the supply voltage fails and the panel PC is only supplied by the battery pack, the control panel remains in operation. -
Page 42: Switching The Panel Pc On And Off
30 V/9 A C9900-U330 battery pack Fig. 28: Wiring diagram C9900-U330 Further information on the battery pack can be found in the corresponding manual in the download finder on the Beckhoff website C9900-U330. Switching the panel PC on and off NOTICE Public networks Connecting the device to public networks without additional protective measures can compromise the safety of the device. - Page 43 The UPS software components with the corresponding drivers must be installed on the PC in order to operate the power supply unit as a UPS. The software components and drivers are already installed on delivery of the PC with operating system. If they are not, you have to install the installation package Beckhoff UPS yourself.
-
Page 44: Configuration
• User name: Administrator • Password: 1 You also have the option of using the Beckhoff Device Manager to remotely configure the device via a web browser. More detailed information is available in the Beckhoff Device Manager manual. First start of Beckhoff Device Manager When your device is booted for the first time, the Beckhoff Device Manager also starts automatically for the first time. -
Page 45: Ups Configuration
Secure passwords Strong passwords are an important prerequisite for a secure system. Beckhoff supplies the device images with standard user names and standard passwords for the operating system. It is imperative that you change these. Controllers are shipped without a password in the UEFI/BIOS setup. Beckhoff recommends assigning a password here as well. -
Page 46: Fig. 31 Select Ups
Configuration Fig. 31: Select UPS 2. Select the manufacturer Beckhoff from the drop-down menu. Fig. 32: Select manufacturer 3. Select at Model/Interface Beckhoff P24Vxxxx. 4. Select the port COM4. 5. Click Finish. Fig. 33: Select model/interface & port 6. Click Apply. Version: 2.0... -
Page 47: Fig. 34 Apply Configuration
Configuration Fig. 34: Apply configuration ð You have configured the UPS. The status of the connected UPS is displayed. Fig. 35: UPS status CP62xx Version: 2.0... -
Page 48: Decommissioning
Decommissioning Decommissioning NOTICE Hardware damage due to power supply A connected power supply can cause damage to the device during disassembly. • Disconnect the power supply from the device before starting to disassemble it. As part of the decommissioning of the device, you must first disconnect the power supply and cables. You can then remove the device from the control cabinet. -
Page 49: Disassembly And Disposal
Decommissioning Disassembly and disposal Before you can remove the device from the control cabinet, you must first disconnect the power supply and the cables (see chapter 6.1 Disconnecting the power supply and cables [} 48]). To remove the device from the control cabinet, follow the steps below: 1. -
Page 50: Maintenance
Cleaning the front screen You can clean the front screen of the device during operation. In order to avoid inadvertent touch entries when doing this, you must first set the device to "Cleaning Mode" with the help of the Beckhoff Display Control Tool. -
Page 51: Fig. 38 Select "Cleaning Mode
Maintenance Fig. 38: Select "Cleaning Mode" ð "Cleaning Mode" is activated. You can now clean the front panel. You can set the duration for which the device should remain in "Cleaning Mode". The period can be set between 5 and 120 seconds. Right-click the sun symbol again and click "Options". Now select the appropriate duration (see Fig.). -
Page 52: Table 31 Device Component Replacement Recommendations
NOTICE Use of incorrect spare parts The use of spare parts not ordered from Beckhoff Service can lead to unsafe and faulty operation. • Only use spare parts that you have ordered from Beckhoff Service. Beckhoff devices are manufactured from components of the highest quality and robustness. They are selected and tested for best interoperability, long-term availability and reliable function under the specified environmental conditions. - Page 53 Maintenance If it is not possible to create an ESD protection zone, you can still protect the device against ESD damage. For example, the following measures can be used: • Use conductive mats connected to the ground potential as underlays. •...
-
Page 54: Replacing The Battery
Maintenance 7.2.1 Replacing the battery NOTICE Incorrect battery type Using any other battery may cause fire or explosion. • Only replace the battery with battery type R/C (BBCV2), order number RC2032, nominal voltage 3 V. • When replacing the battery, make sure that the polarity is correct. NOTICE Battery damage Incorrect handling of the motherboard battery can damage it. -
Page 55: Replacing The Storage Media
If you want to exchange a storage medium according to Beckhoff's recommendation, you must copy the data from the old to the new storage medium. You can use the Beckhoff Service Tool (BST) for this purpose. BST is a graphical backup and restore program for devices with a Windows operating system. You can create an image of your operating system and use it to back up the operating system. -
Page 56: Fig. 42 Cover Removal
The height of the compensation strips differs according to the data carrier type. If you order replacement hard disks and SSDs directly from Beckhoff, please specify your device type or the serial number of your device. The height compensation strips then have the required height for your device. A sticker for pulling out the data carrier is also provided on Beckhoff data carriers. -
Page 57: Fig. 44 Replacing Cfast
Maintenance Fig. 44: Replacing CFast 3. Insert the new CFast into the device in the same orientation until it protrudes just a bit from the device. The sticker with the CFast designation must face the rear panel. 4. Push the CFast into the device. ð... -
Page 58: Replacing The Fan
The device may be damaged if the wrong type of fan is installed. • Only replace the fans with replacement fans from Beckhoff Service. The fans ensure optimal cooling of the device. Order replacement fans only from Beckhoff. Please get in touch with your Beckhoff sales contact. -
Page 59: Troubleshooting
No function of the panel PC No power supply to the panel PC Check the power supply cable Other cause Call Beckhoff Service The Panel PC does not boot BIOS setup settings are incorrect Check BIOS setup settings (load completely... -
Page 60: Technical Data
Supply voltage 22-30 V DC, max. 5.5 A (24 V DC power supply) Power consumption Data sheet for power consumption and power loss in the download finder: https://www.beckhoff.com/en-en/support/download-finder/search- result/?download_group=691754572 Secure element fTPM 2.0 enabled (see TPM manual) Protection rating Front IP65, rear IP20 Vibration resistance (sinusoidal EN 60068-2-6: 10 to 58 Hz: 0.035 mm... -
Page 61: 10 Appendix
33415 Verl Germany Phone: + 49 5246/963-0 email: info@beckhoff.de The addresses of the worldwide Beckhoff branches and agencies can be found on our website at http:// www.beckhoff.com/. You can also find further documentation for Beckhoff components there. CP62xx Version: 2.0... -
Page 62: Approvals
Appendix 10.2 Approvals Your device has at least the following approvals: • CE • EAC • UKCA • FCC You will find all other applicable approvals on the name plate of your device. FCC approvals for the United States of America FCC: Federal Communications Commission Radio Frequency Interference Statement This device was tested and complies with the limits for a digital device of class A, according part 15 of the FCC regulations. -
Page 63: List Of Figures
Disassembly of the strain relief housing..................Fig. 27 Grounding bolt for functional earthing ..................Fig. 28 Wiring diagram C9900-U330......................Fig. 29 Beckhoff Device Manager – Change passwords ................. Fig. 30 Beckhoff Device Manager – Start page ..................Fig. 31 Select UPS........................... Fig. 32 Select manufacturer ........................ - Page 64 List of figures Fig. 45 Removing cover CFast......................... Fig. 46 Replacing the fan ......................... Version: 2.0 CP62xx...
- Page 65 List of tables List of tables Table 1 Device extension options ......................Table 2 Legend structure .......................... Table 3 RS232 interface pin numbering....................Table 4 DVI interface pin assignment ....................... Table 5 USB interface device generation....................Table 6 USB interface pin assignment...................... Table 7 Controller classification based on device generation ..............
- Page 66 , XFC , XTS and XPlanar are registered trademarks of and licensed by Beckhoff Automation GmbH. Third-party trademark statements Intel, the Intel logo, Intel Core, Xeon, Intel Atom, Celeron and Pentium are trademarks of Intel Corporation or its subsidiaries. Microsoft, Microsoft Azure, Microsoft Edge, PowerShell, Visual Studio, Windows and Xbox are trademarks of the Microsoft group of companies.
- Page 67 More Information: www.beckhoff.com/cp62xx Beckhoff Automation GmbH & Co. KG Hülshorstweg 20 33415 Verl Germany Phone: +49 5246 9630 info@beckhoff.com www.beckhoff.com...
Need help?
Do you have a question about the CP62 Series and is the answer not in the manual?
Questions and answers