Advertisement
Quick Links
Hi-Flow Wall Circulation Fan
Installation and Maintenance Instructions.
THESE INSTRUCTIONS MUST BE READ FULLY BEFORE COMMENCING INSTALLATION.
Owner / installer: The life of this apparatus and its efficiency will be increased if
its use and maintenance is carried out in accordance with these instructions and
current statutory requirements. The installation and initial adjustments should be
carried out by a qualified and competent technician. Hydor Limited should be
consulted before substituting or fitting parts from another manufacturer. It is the
responsibility of the installer to verify that the installation is in accordance with
the following standards and the owner is given the current User's Manual.
Any modifications to the fan or its installation, even the smallest
modification, change or elimination of security components or pieces that
influence the efficiency or loss of ventilation, will result in the CE Certification
and Hydor's warranty being cancelled.
Please take note of the following symbols used within this document:
Warning: Hazards associated with electric current and high voltages
Important: Important information
Hydor's policy is one of continual improvement and the right to change a specification at any time
without notice is reserved. Whilst every care has been taken to ensure that the contents of this
document are correct at time of publication, Hydor shall be under no liability whatsoever in respect
of such contents.
Hydor cannot guarantee the operation of any equipment unless all documented instructions are
complied with, without variation.
Hydor is a registered trademark of Hydor Ltd and is a member of Elta Group. All other trademarks,
trade names or company names referenced herein are the property of their respective owners.
incorrect
correct, m
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Hydor HWFA650
Summary of Contents for Hydor HWFA650
- Page 1 Hydor cannot guarantee the operation of any equipment unless all documented instructions are complied with, without variation. Hydor is a registered trademark of Hydor Ltd and is a member of Elta Group. All other trademarks, trade names or company names referenced herein are the property of their respective owners.
-
Page 2: Installation
1.4 These instructions cover only the Hydor product and do not include the supply or installation of any safety equipment that may be required e.g. adequate guarding or protection from rotating parts and proper electrical isolation. - Page 3 power supply will lead to permanent damage to the fan motor. 2.3 Securely fix the wall plate to a structurally sound wall using suitable fasteners (not supplied). Ensure that the wall and wall plate are able to support the cantilevered fan weight. Fit the wall bracket into the wall plate and lock in position.
- Page 4 Fan Maintenance 4.1 Inspection of the fan at least once every 12 months is recommended to ensure that the motor, fan blades, and supporting guards, are clean. Any build up of dust and deposits on the blades guards should be removed using a non-abrasive cleaner.
-
Page 5: Dimensional Drawing
Dimensional Drawing Weight Dimensions HWFA 12.5 30° 14.3 Dimensions in mm Front Guard Rear Guard Front Guard Motor Split Pin Wall Bracket er Ring... - Page 6 Notes...
- Page 7 Notes...
- Page 8 Guarantee Hydor or its agents will, within a period of one year from the date of dispatch from their works, at its option, replace any goods, which are proven to have defects as a result of defective materials or workmanship. The goods must be inspected by a Hydor official and if necessary returned, with a Returns Note Number, carriage paid, for further examination.
Need help?
Do you have a question about the HWFA650 and is the answer not in the manual?
Questions and answers