Hydor HDSF500/6/1/230 Installation And Maintenance Instructions

Destratification fan

Advertisement

Destratification Fan
Installation and Maintenance Instructions.
THESE INSTRUCTIONS MUST BE READ FULLY BEFORE COMMENCING INSTALLATION.
Owner / installer: The life of this apparatus and its efficiency will be increased if
its use and maintenance is carried out in accordance with these instructions and
current statutory requirements. The installation and initial adjustments should
be carried out by a qualified and competent technician. Hydor Limited should be
consulted before substituting or fitting parts from another manufacturer. It is the
responsibility of the installer to verify that the installation is in accordance with all
current statutory requirements and the owner is given the current User's Manual.
Any modifications to the fan or its installation, even the smallest
modification, change or elimination of security components or pieces
that influence the efficiency or loss of ventilation, will result in the CE
Certification and Hydor's warranty being cancelled.
Please take note of the following symbols used within this document:
Warning: Hazards associated with electric current and high voltages
Important: Important information
Hydor's policy is one of continual improvement and the right to change a specification at any time
without notice is reserved. Whilst every care has been taken to ensure that the contents of this
document are correct at time of publication, Hydor shall be under no liability whatsoever in respect
of such contents.
Hydor cannot guarantee the operation of any equipment unless all documented instructions are
complied with, without variation.
Hydor is a registered trademark of EG Agri Ltd and is a member of Elta Group. All other trademarks,
trade names or company names referenced herein are the property of their respective owners.
incorrect
correct, minimum hei

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HDSF500/6/1/230 and is the answer not in the manual?

Questions and answers

Summary of Contents for Hydor HDSF500/6/1/230

  • Page 1 Hydor cannot guarantee the operation of any equipment unless all documented instructions are complied with, without variation. Hydor is a registered trademark of EG Agri Ltd and is a member of Elta Group. All other trademarks, trade names or company names referenced herein are the property of their respective owners.
  • Page 2 1.3 All electrical installations must be carried out by suitably qualified and competent personnel in accordance with all current statutory requirements. 1.4 These instructions cover only the Hydor product and do not include the supply or installation of any safety equipment that may be required e.g. proper electrical isolation.
  • Page 3 2.1 Upon receipt, the fan unit should be visually inspected to check for any damage. Ensure that the impeller is free to rotate. 2.2 If there are any queries concerning the fan unit, Hydor should be contacted prior to installation.
  • Page 4 Guarantee Hydor or its agents will, within a period of one year from the date of dispatch from their works, at its option, replace any goods, which are proven to have defects as a result of defective materials or workmanship. The goods must be inspected by a Hydor official and if necessary returned, with a Returns Note Number, carriage paid, for further examination.

This manual is also suitable for:

Hdsf500/6/3/230Hdsf500/6/3/415Hdsf630/6/1/230Hdsf630/6/3/230Hdsf630/6/3/415

Table of Contents