Advertisement
Table of Contents
Installation and Maintenance Instructions
THESE INSTRUCTIONS MUST BE READ FULLY BEFORE
COMMENCING INSTALLATION
Code
HPF650
HWF650
1.0
GENERAL
1.1
It is important these Installation and Maintenance Instructions are fully adhered to.
1.2
Full details of the unit supplied are shown on the product nameplate. If in doubt about any detail
contact HYDOR or its agents for clarification.
1.3
All electrical installation must be carried out by suitably qualified and competent
personnel in accordance with all current statuary requirements.
1.4
These instructions cover only the HYDOR product and do not include the supply or
installation of any safety equipment that may be required e.g. adequate guarding or
protection from rotating parts and proper electrical isolation.
1.5
Any declarations made by HYDOR about product installation and safety, are
dependant on the fan equipment being used within installations which themselves
meet the requirements of the relevant Standards and Directives of your region.
1.6
The fan must be installed indoors in a dry, sheltered position and is designed for use in an ambient
temperature of up to 45 °C. The fan is not suitable for corrosive or explosive atmospheres.
1.7
The installer should provide easy access to the fan to facilitate future maintenance.
1.8
The installer should ensure the fan is adequately supported.
1.9
This product is not intended for use by young children or infirm persons unless they have been
adequately supervised by a responsible person to ensure that they can use the product safely.
Young children should be supervised to ensure that they do not play with the appliance.
Supply
230V/1Ph/50Hz
230V/1Ph/50Hz
FL Amps
0.9/0.85/0.98
135/143/179
0.9/0.85/0.98
135/143/179
Watts
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hydor HPF650
Summary of Contents for Hydor HPF650
- Page 1 All electrical installation must be carried out by suitably qualified and competent personnel in accordance with all current statuary requirements. These instructions cover only the HYDOR product and do not include the supply or installation of any safety equipment that may be required e.g. adequate guarding or protection from rotating parts and proper electrical isolation.
- Page 2 INSTALLATION WARNING – The fan must be isolated from the power supply during installation and maintenance. The fan is supplied pre-wired to a standard three pin plug and must be earthed in accordance with the local regulations. Upon receipt, the fan equipment should be visually inspected to check for any damage. Check the details on the motor rating plate to ensure that the correct power supply (voltage, frequency and phase) is available.
- Page 3 GUARANTEE HYDOR or its agents will, within a period of 1year from the date of dispatch from their works, repair or, at its option, replace any goods, which are proven to have defects as a result of defective materials or workmanship.
Need help?
Do you have a question about the HPF650 and is the answer not in the manual?
Questions and answers