Advertisement
HVFB Typhoon Fan
Installation and Maintenance Instructions.
THESE INSTRUCTIONS MUST BE READ FULLY BEFORE COMMENCING INSTALLATION.
Owner / installer: The life of this apparatus and its efficiency will be increased if
its use and maintenance is carried out in accordance with these instructions and
current statutory requirements. The installation and initial adjustments should be
carried out by a qualified and competent technician. Hydor Limited should be
consulted before substituting or fitting parts from another manufacturer. It is the
responsibility of the installer to verify that the installation is in accordance with
the following standards and the owner is given the current User's Manual.
Any modifications to the fan or its installation, even the smallest
modification, change or elimination of security components or pieces that
influence the efficiency or loss of ventilation, will result in the CE Certification
and Hydor's warranty being cancelled.
Code
HVFB30
230V/1Ph/50Hz
HVFB45
230V/1Ph/50Hz
1.
General
1.1
It is important these Installation and Maintenance Instructions are fully
adhered to.
1.2 Full details of the unit supplied are shown on the product nameplate. If in
doubt about any detail contact Hydor or its agents for clarification.
1.3 All electrical installation must be carried out by suitably qualified and
competent personnel in accordance with all current statutory
requirements.
1.4 These instructions cover only the Hydor product and do not include the
supply or installation of any safety equipment that may be required e.g.
adequate guarding or protection from rotating parts and proper electrical
isolation.
1.5 Any declarations made by Hydor about product installation and safety, are
Supply
FL Amps
0.22
0.38
Watts
Weight kg
50
110
HVFB Inst Issue 3: 18.06.15
incorrect
correct, m
3.8
5.5
Advertisement
Table of Contents
Related Manuals for Hydor HVFB
Summary of Contents for Hydor HVFB
- Page 1 1.4 These instructions cover only the Hydor product and do not include the supply or installation of any safety equipment that may be required e.g. adequate guarding or protection from rotating parts and proper electrical isolation.
- Page 2 HVFB-45 and electrical cable will not cause a hazard. The cable must not be pulled. 2.4 Wall mounting (HVFB-30 & HVFB-45) – Securely fix the fan to a structurally U-shape base tube sound wall using suitable fasteners and the mounting brackets provided.
- Page 3 The pair of wall mount parts for HVFB-45 must be installed on the same level. Notes Wall mounted parts must be installed by qualified technician to avoid hazard. Periodic inspection by qualified technician for stability of wall mount parts and the fan unit is necessary.
- Page 4 Notes Notes HVFB Inst Issue 3: 18.06.15 HVFB Inst Issue 3: 18.06.15...
- Page 5 Guarantee Hydor or its agents will, within a period of one year from the date of dispatch from their works, at its option, replace any goods, which are proven to have defects as a result of defective materials or workmanship. The goods must be inspected by a Hydor official and if necessary returned, with a Returns Note Number, carriage paid, for further examination.
Need help?
Do you have a question about the HVFB and is the answer not in the manual?
Questions and answers