Table of Contents
Advertisement
Quick Links
HV Mobile Belt Drive Fan
Installation and Maintenance Instructions.
THESE INSTRUCTIONS MUST BE READ FULLY BEFORE COMMENCING INSTALLATION.
Owner / installer: The life of this apparatus and its efficiency will be increased if
its use and maintenance is carried out in accordance with these instructions and
current statutory requirements. The installation and initial adjustments should be
carried out by a qualified and competent technician. Hydor Limited should be
consulted before substituting or fitting parts from another manufacturer. It is the
responsibility of the installer to verify that the installation is in accordance with
the following standards and the owner is given the current User's Manual.
Any modifications to the fan or its installation, even the smallest
modification, change or elimination of security components or pieces that
influence the efficiency or loss of ventilation, will result in the CE Certification
and Hydor's warranty being cancelled.
Please take note of the following symbols used within this document:
Warning: Hazards associated with electric current and high voltages
Important: Important information
Hydor's policy is one of continual improvement and the right to change a specification at any time
without notice is reserved. Whilst every care has been taken to ensure that the contents of this
document are correct at time of publication, Hydor shall be under no liability whatsoever in respect
of such contents.
Hydor cannot guarantee the operation of any equipment unless all documented instructions are
complied with, without variation.
Hydor is a registered trademark of Hydor Ltd and is a member of Elta Group. All other trademarks,
trade names or company names referenced herein are the property of their respective owners.
incorrect
correct, m
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hydor HV800
Summary of Contents for Hydor HV800
- Page 1 Hydor cannot guarantee the operation of any equipment unless all documented instructions are complied with, without variation. Hydor is a registered trademark of Hydor Ltd and is a member of Elta Group. All other trademarks, trade names or company names referenced herein are the property of their respective owners.
- Page 2 Health and Safety 2.1 These instructions cover only the Hydor product and do not include the supply or installation of any safety equipment that may be required e.g. adequate guarding or protection from rotating parts and proper electrical isolation.
- Page 3 3.2 Any damage or shortages should be notified to the carrier immediately. 3.3 Hydor cannot accept any responsibility for damage sustained whilst unloading from the carrier, or subsequent damage on Site. 3.4 If there are any queries concerning the fan unit, Hydor should be contacted prior to installation. Electrical Connection 4.1 The HV Belt Drive mobile is supplied with a length of flex terminated into a...
- Page 4 Maintenance WARNING: The fan(s) must be isolated from the power supply during installation and maintenance. 6.1 Only a suitably qualified and competent person may carry out maintenance after the electrical supply has been isolated. Internal Access 6.2 To access the internals of the fan, an 8mm hex head socket should be used to remove the fixings around the wire guard.
- Page 5 Technical Support Contact your distributor for technical support on this product. Do not call the Hydor technical support department unless your distributor has first given their advice and attempted to rectify the issue. Technical support will not be available if the instruction manual has not been read and understood.
- Page 6 Notes...
- Page 7 Notes...
- Page 8 Guarantee Hydor or its agents will, within a period of 1 year from the date of dispatch from their works, repair or, at its option, replace any goods, which are proven to have defects as a result of defective materials or workmanship.
Need help?
Do you have a question about the HV800 and is the answer not in the manual?
Questions and answers