Advertisement
Mixed Flow Fan
Installation and Maintenance Instructions.
THESE INSTRUCTIONS MUST BE READ FULLY BEFORE COMMENCING INSTALLATION.
Owner / installer: The life of this apparatus and its efficiency will be increased if
its use and maintenance is carried out in accordance with these instructions and
current statutory requirements. The installation and initial adjustments should be
carried out by a qualified and competent technician. Hydor Limited should be
consulted before substituting or fitting parts from another manufacturer. It is the
responsibility of the installer to verify that the installation is in accordance with
the following standards and the owner is given the current User's Manual.
Any modifications to the fan or its installation, even the smallest
modification, change or elimination of security components or pieces that
influence the efficiency or loss of ventilation, will result in the CE Certification
and Hydor's warranty being cancelled.
Model
HIMF100
HIMF125
HIMF150
HIMF200
Speed r/min
High
2300
Low
2000
High
2300
Low
2000
High
2400
Low
High
Low
FLC Amps
1900
0.252
2480
2266
Electrical Data
Input W
0.117
0.116
0.148
0.143
0.291
0.56
0.53
incorrect
correct, m
27
27
34
33
67
58
120
113
Advertisement
Table of Contents
Related Manuals for Hydor HIMF100
Summary of Contents for Hydor HIMF100
- Page 1 The installation and initial adjustments should be carried out by a qualified and competent technician. Hydor Limited should be consulted before substituting or fitting parts from another manufacturer. It is the responsibility of the installer to verify that the installation is in accordance with the following standards and the owner is given the current User’s Manual.
- Page 2 1.3 All electrical Installations must be carried out by suitably qualified and competent personnel in accordance with all statutory requirements. 1.4 These instructions cover only the Hydor Ltd product and do not include the supply or installation of any safety equipment that may be required e.g.
- Page 3 2.2 If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. 2.3 If there are any queries concerning the fan equipment, Hydor Ltd should be contacted prior to the installation.
- Page 4 4.2 All fastenings should be checked for tightness. In addition, all rotating items should be checked. 4.3 Bearings are of the “sealed for life” type and will not need a detailed inspection. WARNING This fan is fitted with a one shot thermal fuse which switches the fan off in the event of a fault condition.
- Page 5 Product Information Single phase 220V to 240V 50Hz or 220V 60Hz Dimensions (mm) Weight Model ØA ØF HIMF100 202 190 140 HIMF125 124 202 190 140 HIMF150 147 298 194 HIMF200 198 254 129 228 272 120 236...
- Page 6 Notes...
- Page 7 Notes...
- Page 8 Guarantee Hydor or its agents will, within a period of one year from the date of dispatch from their works, at its option, replace any goods, which are proven to have defects as a result of defective materials or workmanship. The goods must be inspected by a Hydor official and if necessary returned, with a Returns Note Number, carriage paid, for further examination.
Need help?
Do you have a question about the HIMF100 and is the answer not in the manual?
Questions and answers