Advertisement
Table of Contents
HV Light Baffle
Installation and Maintenance Instructions.
THESE INSTRUCTIONS MUST BE READ FULLY BEFORE COMMENCING INSTALLATION.
Owner / installer: The life of this apparatus and its efficiency will be increased if
its use and maintenance is carried out in accordance with these instructions and
current statutory requirements. The installation and initial adjustments should
be carried out by a qualified and competent technician. Hydor Limited should be
consulted before substituting or fitting parts from another manufacturer. It is the
responsibility of the installer to verify that the installation is in accordance with all
current statutory requirements and the owner is given the current User's Manual.
1.
General
1.1
It is important these Installation and Maintenance Instructions are fully
adhered to.
1.2 These instructions cover only the Hydor product.
1.3 The Baffles are designed to fit onto the fan cases.
1.4 Baffles are specifically sized the fit the range of HV Belt Drive fans.
1.5 Baffles are constructed of galvanised or Aluzinc steel cases with black
polypropylene corrugated vanes.
1.6 Baffles can be fitted to both internal and external faces of the fan,
depending on the situation, and can reduce light ingress from 150,000 lux
to 0.1-0.15 lux.
1.7
This product is not intended for use by young children or infirm persons
unless they have been adequately supervised by a responsible person.
Young children should be supervised to ensure that they do not play with
the cover.
WARNING: The fan must be isolated from the power supply when the
Baffle is being installed.
incorrect
correct, minimum hei
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hydor HV Series
Summary of Contents for Hydor HV Series
- Page 1 The installation and initial adjustments should be carried out by a qualified and competent technician. Hydor Limited should be consulted before substituting or fitting parts from another manufacturer. It is the responsibility of the installer to verify that the installation is in accordance with all current statutory requirements and the owner is given the current User’s Manual.
- Page 2 Dimensions Model Number HV800 HV1000 1150 HV1250 (1.1 kW) 1380 HV1250 H (1.5 kW) 1380 HV1500 1495 HV2000 1930 Dimensions in mm. Pressure Drop Light Baffle Cross Section 228.6 Air Velocity (m/s) Installation 3.1 Ensure that the fan is switched off and isolated from the supply. 3.2 Particular attention should be paid if the fan system involved automatic controls.
- Page 3 3.6 The Baffle should now be hung on the “hanger”. It is retained by two over- centre clips, one on each side. 3.7 Two retainers are supplied with the Baffle, and these must be fitted to the sides of the fan casing. Rivets are supplied. 3.8 These retainers must be fixed so the retaining clips, when closed, are in tension, so retaining the Baffle securely against the fan casing.
- Page 4 Guarantee Hydor or its agents will, within a period of one year from the date of dispatch from their works, at its option, replace any goods, which are proven to have defects as a result of defective materials or workmanship. The goods must be inspected by a Hydor official and if necessary returned, with a Returns Note Number, carriage paid, for further examination.
Need help?
Do you have a question about the HV Series and is the answer not in the manual?
Questions and answers