Table of Contents
Advertisement
Quick Links
HV Wall Cowl
Installation and Maintenance Instructions.
THESE INSTRUCTIONS MUST BE READ FULLY BEFORE COMMENCING INSTALLATION.
Owner / installer: The life of this apparatus and its efficiency will be increased if
its use and maintenance is carried out in accordance with these instructions and
current statutory requirements. The installation and initial adjustments should be
carried out by a qualified and competent technician. Hydor Limited should be
consulted before substituting or fitting parts from another manufacturer. It is the
responsibility of the installer to verify that the installation is in accordance with all
current statutory requirements and the owner is given the current User's Manual.
Any modifications to the system or its installation, even the smallest
modification, change or elimination of security components or pieces that
influence the efficiency or loss of ventilation, will result in Hydor's warranty
being cancelled.
Please take note of the following symbols used within this document:
Warning: Hazards associated with electric current and potentially dangerous voltages
Important: Important information
Hydor's policy is one of continual improvement and the right to change a specification at any time
without notice is reserved. Whilst every care has been taken to ensure that the contents of this
document are correct at time of publication, Hydor shall be under no liability whatsoever in respect
of such contents.
Hydor cannot guarantee the operation of any equipment unless all documented instructions are
complied with, without variation.
Hydor is a registered trademark of Hydor Ltd and is a member of Elta Group. All other trademarks,
trade names or company names referenced herein are the property of their respective owners.
incorrect
correct, m
Advertisement
Table of Contents
Related Manuals for Hydor HVWC800
Summary of Contents for Hydor HVWC800
- Page 1 Hydor cannot guarantee the operation of any equipment unless all documented instructions are complied with, without variation. Hydor is a registered trademark of Hydor Ltd and is a member of Elta Group. All other trademarks, trade names or company names referenced herein are the property of their respective owners.
- Page 2 It is important these Installation and Maintenance Instructions are fully adhered to. 1.2 These instructions cover only the Hydor product. 1.3 The Cowls are designed to fit onto the external wall over the fan aperture. 1.4 Cowls are specifically sized to fit the range of HXP Plate Fans and HV Belt Drive Fans.
- Page 3 HVWC800 & HVWC1000 Assembly (See 4. for larger size assembly) 3.1 If you ordered a flatpack unassembled unit, follow these steps to assemble your HV Wall Cowl. 3.2 You will need a rivet gun to complete assembly. While assembly is possible with 1 person, an extra pair of hands is often helpful due to the size of the unit.
- Page 4 3.4 Step 1 3.5 Step 2 Align the left and middle piece Align the right and middle piece flanges and rivet together with 9 flanges and rivet together with 9 rivets. rivets. 3.6 The unit is now complete. Please see following steps if you are adding a mesh guard.
- Page 5 HVWC1250, HVC1500 & HVWC2000 Assembly 4.1 If you ordered a flatpack unassembled unit, follow these steps to assemble your HV Wall Cowl. 4.2 You will need a rivet gun to complete assembly. While assembly is possible with 1 person, an extra pair of hands is often helpful due to the size of the unit.
- Page 6 4.4 Step 1 4.5 Step 2 Align the front and rear left piece Alight front and rear right piece flanges and rivet together with 6 flanges and rivet together with 6 rivets. rivets. 4.7 Step 4 4.6 Step 3 Align the completed left and middle Align the front and rear middle piece flanges and rivet together with piece flanges and rivet together...
- Page 7 4.8 Step 5 4.9 The unit is now complete Align the completed right and middle piece flanges and rivet together with 10 rivets. Optional Mesh Guard 5.0 Install the cross bar, fitting with 4 rivets. 5.1 Place the mesh onto the cowl. 5.2 Place the metal strip on the mesh and attach with supplied rivets.
- Page 8 Guarantee Hydor or its agents will, within a period of one year from the date of dispatch from their works, at its option, replace any goods, which are proven to have defects as a result of defective materials or workmanship. The goods must be inspected by a Hydor official and if necessary returned, with a Returns Note Number, carriage paid, for further examination.
Need help?
Do you have a question about the HVWC800 and is the answer not in the manual?
Questions and answers