Phoenix DryMAX BLE Quick Start Manual

L Pro
L Pro
L Pro
DryMAX BLE and DryMAX XL Pro
SETUP AND OPERATION
SETUP AND OPERATION
Thank you for purchasing a Phoenix DryMAX BLE or DryMAX XL Pro LGR Dehumidifier.
Thank you for purchasing a Phoenix DryMAX BLE or DryMAX XL Pro LGR Dehumidifier.
For a complete DryMAX BLE manaul, visit https://usephoenix.com/wp-content/uploads sites/3/2024/05/TS-2104.pdf
For a complete DryMAX XL Pro manaul, visit https ://usephoenix.com/wp-content/uploads/sites/3/2024/05/TS-2105.pdf
For a complete DryMAX BLE manaul, visit
Please follow the start guide steps below for quick setup operation.
https://usephoenix.com/wp-content/uploads/sites/3/2024/05/TS-2104.pdf
AFTER THE JOB
AFTER THE JOB
AFTER THE JOB
Press the "POWER" button. AFTER THE JOB
Press the "POWER" button.
Press the "POWER" button.
For a complete DryMAX XL Pro manaul, visit Press the "POWER" button.
Wait for the "POWERING DOWN" timer to finish.
Wait for the "POWERING DOWN" timer to finish.
https://usephoenix.com/wp-content/uploads/sites/3/2024/05/TS-2105.pdf
Wait for the "POWERING DOWN" timer to finish.
This allows the blower to remove water from the coils and it gives the coils a
This allows the blower to remove water from the coils and it gives the coils a Wait for the "POWERING DOWN" timer to finish.
chance to warm up so they stop condensing water. This allows the blower to remove water from the coils and it gives the coils a
chance to warm up so they stop condensing water.
This allows the blower to remove water from the coils and it gives the coils a
chance to warm up so they stop condensing water.
Please follow the start guide steps below for quick setup operation. chance to warm up so they stop condensing water.
IMPORTANT: Final purge happens at the end of the power down cycle.
IMPORTANT: Final purge happens at the end of the power down cycle.
IMPORTANT: Final purge happens at the end of the power down cycle.
IMPORTANT: Final purge happens at the end of the power down cycle.
The unit will enter "STAND BY" mode.
The unit will enter "STAND BY" mode.
The unit will enter "STAND BY" mode.
The unit will enter "STAND BY" mode.
DOWNLOAD THE DryLINK APP
Unplug the dehumidifier.
Unplug the dehumidifier.
Unplug the dehumidifier.
Download the free DryLINK Mobile App for Apple or Android. Open the app and
Unplug the dehumidifier.
login or create an account. Monitor and create your job's progress using DryLINK.
Disconnect the condensate hose.
Disconnect the condensate hose.
Visit usephoenix.com for more information.
Disconnect the condensate hose.
Disconnect the condensate hose.
CORD AND HOSE STORAGE
CORD AND HOSE STORAGE
CORD AND HOSE STORAGE
CORD AND HOSE STORAGE
Put the power cord and condensate hose back in the storage pocket on the top of
STEP 1
Put the power cord and condensate hose back in the storage pocket on the top of
the dehumidifier. Put the power cord and condensate hose back in the storage pocket on the top of
the dehumidifier.
Put the power cord and condensate hose back in the storage pocket on the top of
Plug your dehumidifier into a 110V outlet. The unit will enter "STAND BY" mode.
the dehumidifier.
the dehumidifier.
For DryMAX XL PRO only –
For DryMAX XL PRO only –
STEP 2
To store the cords in the storage pocket: For DryMAX XL PRO only –
To store the cords in the storage pocket:
For DryMAX XL PRO only –
Connect your condensate hose to your dehumidifier and place the other end
To store the cords in the storage pocket:
To store the cords in the storage pocket:
into a drain, sink, etc.
Wrap the condensate hose so that it fills the entire space.
Wrap the condensate hose so that it fills the entire space.
Wrap the condensate hose so that it fills the entire space.
Wrap the condensate hose so that it fills the entire space.
STEP 3
Wrap the power cord slightly tighter so that it fits inside the condensate hose.
Wrap the power cord slightly tighter so that it fits inside the condensate hose.
Press the "POWER" button. Wrap the power cord slightly tighter so that it fits inside the condensate hose.
Wrap the power cord slightly tighter so that it fits inside the condensate hose.
For DryMAX BLE only –
STEP 4 For DryMAX BLE only –
For DryMAX BLE only –
To store the cords in the storage pocket:
To store the cords in the storage pocket: For DryMAX BLE only –
Compressor will turn on after 60 seconds. The status bar will pulse green.
To store the cords in the storage pocket:
To store the cords in the storage pocket:
Wrap the power cord tightly first and place in the storage pocket.
Wrap the power cord tightly first and place in the storage pocket.
STEP 5
Wrap the power cord tightly first and place in the storage pocket.
Wrap the power cord tightly first and place in the storage pocket.
When the light bar on the main dashboard is solid green, you are dehumidifying. Wrap the condensate hose and place on top of the cord into the storage pocket
Wrap the condensate hose and place on top of the cord into the storage pocket
Wrap the condensate hose and place on top of the cord into the storage pocket
as far back as possible.
as far back as possible.
Wrap the condensate hose and place on top of the cord into the storage pocket
as far back as possible.
as far back as possible.
USEPHOENIX.COM | 800-533-7533
USEPHOENIX.COM | 800-533-7533
DryMAX BLE and DryMAX XL Pro
DryMAX BLE and DryMAX XL Pro
LGR Dehumidifier
SETUP AND OPERATION
SETUP AND OPERATION
DryMAX BLE and DryMAX XL Pro
DryMAX BLE and DryMAX XL Pro
QUICK START GUIDE
Thank you for purchasing a Phoenix DryMAX BLE or DryMAX XL Pro LGR Dehumidifier.
DryMAX BLE and DryMAX XL Pro
Thank you for purchasing a Phoenix DryMAX BLE or DryMAX XL Pro LGR Dehumidifier.
DryMAX BLE and DryMAX XL Pro
For a complete DryMAX BLE manaul, visit
For a complete DryMAX BLE manaul, visit
https://usephoenix.com/wp-content/uploads/sites/3/2024/05/TS-2104.pdf
https://usephoenix.com/wp-content/uploads/sites/3/2024/05/TS-2104.pdf
QUICK START GUIDE
QUICK START GUIDE
QUICK START GUIDE
QUICK START GUIDE
For a complete DryMAX XL Pro manaul, visit
For a complete DryMAX XL Pro manaul, visit
https://usephoenix.com/wp-content/uploads/sites/3/2024/05/TS-2105.pdf
https://usephoenix.com/wp-content/uploads/sites/3/2024/05/TS-2105.pdf
Please follow the start guide steps below for quick setup operation.
Please follow the start guide steps below for quick setup operation.
DOWNLOAD THE DryLINK®
APP
(optional)
DOWNLOAD THE DryLINK APP
Download the free DryLINK Mobile App
DOWNLOAD THE DryLINK APP
for Apple or Android. Open the app and
Download the free DryLINK Mobile App for Apple or Android. Open the app and
Download the free DryLINK Mobile App for Apple or Android. Open the app and
login or create an account. Monitor
login or create an account. Monitor and create your job's progress using DryLINK.
login or create an account. Monitor and create your job's progress using DryLINK.
and create your job's progress using
Visit usephoenix.com for more information.
Visit usephoenix.com for more information.
DryLINK. Visit usephoenix.com for
more information.
STEP 1
®
STEP 1
STEP 1
Plug your dehumidifier into a 110V
Plug your dehumidifier into a 110V outlet. The unit will enter "STAND BY" mode.
Plug your dehumidifier into a 110V outlet. The unit will enter "STAND BY" mode.
outlet. The unit will enter "STAND BY"
mode.
STEP 2
STEP 2
STEP 2
Connect your condensate hose to your dehumidifier and place the other end
Connect your condensate hose to your dehumidifier and place the other end
into a drain, sink, etc.
Connect your condensate hose to your
into a drain, sink, etc.
dehumidifier and place the other end
into a drain, sink, etc. STEP 3
STEP 3
STEP 3
Press the "POWER" button.
Press the "POWER" button.
Press the "POWER" button.
STEP 4
STEP 4
STEP 4
Compressor will turn on after 60 seconds. The status bar will pulse green.
Compressor will turn on after 60 seconds. The status bar will pulse green.
Compressor will turn on after 60
seconds. The status bar will pulse
STEP 5
green.
STEP 5
When the light bar on the main dashboard is solid green, you are dehumidifying.
STEP 5
When the light bar on the main dashboard is solid green, you are dehumidifying.
When the light bar on the main
dashboard is solid green, you are
dehumidifying.
USEPHOENIX.COM | 800-533-7533
USEPHOENIX.COM | 800-533-7533
LGR Dehumidifier
LGR Dehumidifier
QUICK START GUIDE
QUICK START GUIDE
LGR Dehumidifier
LGR Dehumidifier
LGR Dehumidifier
LGR Dehumidifier
AFTER THE JOB
Press the "POWER" button.
®
®
Wait for the "POWERING DOWN" timer to
finish.
This allows the blower to remove water
from the coils and it gives the coils a chance
to warm up so they stop condensing water.
IMPORTANT: Final purge happens at the
(optional)
end of the power down cycle.
The unit will enter "STAND BY" mode.
Unplug the dehumidifier.
Disconnect the condensate hose.
CORD AND HOSE STORAGE
Put the power cord and condensate hose
back in the storage pocket on the top of
the dehumidifier.
For DryMAX XL PRO Only:
To store the cords in the storage pocket,
wrap the condensate hose so that it fills
the entire space.
Wrap the power cord slightly tighter so
that it fits inside the condensate hose.
For DryMAX BLE Only:
To store the cords in the storage pocket,
wrap the power cord tightly first and place
in the storage pocket.
Wrap the condensate hose and place on
top of the cord into the storage pocket as
far back as possible.
(optional)
(optional)
DryMAX XL PRO
DryMAX XL PRO
DryMAX XL PRO
DryMAX XL PRO
DryMAX BLE
DryMAX BLE
DryMAX BLE
DryMAX BLE