DryMAX XL, DryMAX BLE and DryMAX XL Pro
SETUP AND OPERATION
Thank you for purchasing a Phoenix DryMAX XL, DryMAX BLE or
DryMAX XL Pro LGR Dehumidifier.
For a complete DryMAX XL manual, visit
https://drylink.usephoenix.com/wp-content/uploads/sites/8/2023/06/TS-1141.pdf
For a complete DryMAX BLE manual, visit
https://drylink.usephoenix.com/wp-content/uploads/sites/8/2023/06/TS-1182.pdf
For a complete DryMAX XL Pro manual, visit
https://drylink.usephoenix.com/wp-content/uploads/sites/8/2023/09/TS-2047.pdf
Please follow the start guide steps below for quick setup operation.
DOWNLOAD THE DryLINK APP
Download the free DryLINK Mobile App for Apple or Android. Open the app and
login or create an account. Monitor and create your job's progress using DryLINK.
Visit usephoenix.com for more information.
STEP 1
Plug your dehumidifier into a 110V outlet. The unit will enter "STAND BY" mode.
STEP 2
Connect your condensate hose to your dehumidifier and place the other end
into a drain, sink, etc.
STEP 3
Press the "POWER" button.
STEP 4
Compressor will turn on after 60 seconds. The status bar will pulse green.
STEP 5
When the light bar on the main dashboard is solid green, you are dehumidifying.
USEPHOENIX.COM | 800-533-7533
LGR Dehumidifier
QUICK START GUIDE
®
(optional)
Need help?
Do you have a question about the DryMAX XL and is the answer not in the manual?
Questions and answers