Atmel ATAB542 WB Series User Manual page 10

2.3.1.4 RSSI
2.3.1.5 PKT TX
ATAB542x-x-WB User Guide
Indicates received signal strength
Note: a 2nd transceiver must be put into one of the above transmit modes (MARK, SPACE, or
TOGGLE) in order to see a received signal strength indication
P - accesses menu items
L - goes to DIAGNOSTICS
U,D - scrolls thru menu (MARK, SPACE, ...)
CH x - sets radio channel (0 to 9)
P - sets channel and goes to FSK
L - goes to FSK
U - increments channel
D - decrements channel
FSK - sets transmitter to ASK or FSK
P - sets mode and goes to x KBPS
L - goes to x KBPS
U,D - toggles between ASK and FSK
x KBPS - sets data rate, dependent on modulation chosen
P - sets data rate and goes to RSSI
L - goes to RSSI
U,D - changes data rate (1,5,10 kbps for ASK; 1,5,10,20,40 kbps for FSK)
RSSI, number, vertical bar-graph - shows a number and bar-graph to indicate
relative signal strength
P,L,R,U,D - goes to RSSI (main menu)
Transmits packet data
Note: a 2nd transceiver must be put into the PKT RX mode in order to see this demonstration
P - accesses menu items
L - goes to DIAGNOSTICS
U,D - scrolls thru menu (MARK, SPACE, ...)
CH x - sets radio channel (0 to 9)
P - sets channel and goes to FSK
L - goes to FSK
U - increments channel
D - decrements channel
FSK - sets transmitter to ASK or FSK
P - sets mode and goes to x KBPS
L - goes to x KBPS
U,D - toggles between ASK and FSK
x KBPS - sets data rate, dependent on modulation chosen
P - sets data rate and goes to PKT TX
L - goes to PKT TX
U,D - changes data rate (1,5,10 kbps for ASK; 1,5,10,20,40 kbps for FSK)
PKT TX (blinking), number - transmits a packet
P, R - transmits packet and increments counter
Operating the Transceivers
2-5
5219A–WIRE–04/07