ekwb EK-Quantum Vector3 FE RTX 5090 User Manual page 10

STEP 7
Remove the retention bracket by unscrewing four (4) screws.
Carefuly lift the GPU PCB
STEP 7
STEP 8
Liquid metal removal
PROTECTD PCB
Before removing liquid metal, protect the GPU die surrounding
components with painter's tape. This will ensure that the liquid metal
does not come into contact with any PCB components, as it is
electrically conductive.
GPU DIE
Use Q-tips and isopropyl alcohol to remove liquid metal.
RUBBER
GASKET
Remove rubber gasket. The bottom side of the rubber is sticky, use a
plastic tool from the outside to go under it and lift it.
STEP 8
- 10 -
Important! Be careful with the liquid metal so you don't
spill it on the card!