Page 2
Time to get started Set up a clean and soft workplace to avoid damage during assembly. You can use the box and internal protections as a cover. It also helps to double-check if you have got all the pieces and parts before diving into the assembly.
Drawer back LOT: AA YY WW-XXXX Distribution By: Date: MM/20YY Bottom panel Walker Edison Furniture Company Rev. MM/20YY-VX COD. 1553 W 9000 S, West Jordan, UT 84088 United States CANFER compliant / conforme au CANFER TSCA Title VI compliant / conforme au titre VI de la TSCA Drawer runner TSCA Title VI certied / certié...
Hardware List Part Size Name Quantity Wooden dowel 8x30mm Wooden dowel 10x20mm 4x25mm Screw 3,5x30m Screw M4x22mm Screw 4,5x45m Screw 10x10mm Nail Knob Wooden dowel 8x40mm Bolt 7x80mm Hex Key The hardware quantities listed above are required for proper assembly. Extra hardware pieces may be included.
Page 5
Step 1 Let’s get started! Insert the Wooden dowels (B) into each Wood Slider (27). Wood Dowels Dica Dowels are essential in furniture assembly to create strong, precise connections. They ensure structural integrity, prevent shifting, and simplify alignment, resulting in sturdier, longer-lasting furniture. Follow these steps: 1: Select the appropriate size 2: Insert into drilled hole and press...
Page 6
Step 2 Insert the Wooden Dowels (A) into the Bottom Front Crossbeam (4), Back Crossbeam (5), Upper Front Crossbeam (6), Left side drawer (16), Right drawer side (18), Left side panel (22), Right side panel (23) and Bottom panel (25). Dica To keep your product looking its best andscratch-free, try assembling it on a soft surface like carpet or a blanket.
Page 7
Step 3 Next, attach the Wood Sliders (27) to Left Panel (22) and Right Panel (23) using Screws (C) and a Phillips screwdriver.
Page 8
Step 4 Secure Bottom Panel (25) to Left Side Panel (22) with Screw (D) and Phillips head screwdriver.
Page 9
Step 5 Secure Bottom Front Crossbeam(4), Back Crossbeam (5), Upper Front Crossbeam (6) and Right Side Panel (23) to Bottom Panel (25) and Left Side Panel (22) using Screw (D) and a Phillips head screwdriver.
Page 10
Step 6 Use Screw (D) to attach Top Panel (21) to the parts you have already assembled.
Page 11
Step 7 Use Screw (D) to attach Upper Front Crossbeam(6) to the Top Panel (21), Left Side Panel (22) and Right Side Panel (23).
Page 12
Step 8 Secure Foot Crossbeam (17) to Foot (8) with Bolt ( J) and Hex Key(K).
Page 13
Step 9 Use Screw (F) and a Phillips head screwdriver to secure Foot Crossbeam(17) to Left and Right Side Panel (22, 23).
Page 14
Step 10 Secure Back panel (7) to the assembled nightstand using Nails (G) and a hammer.
Page 16
Step 12 Secure Left Drawer Side (16) and Right Drawer Side(18) to Drawer Front (10) using Screw (D) and a Phillips head screwdriver.
Page 17
Step 13 Insert Drawer Bottom (13) between Left Drawer Side (16) and Right Drawer Side (18). Attach Drawer Back (24) to Left Drawer Side (16) and Right Drawer Side(18) with Screws (D) and a Phillips head screwdriver.
Page 18
Step 14 Attach the Handle (H) to Drawer Front(10) with Screw (E) and a Phillips head screwdriver.
Page 19
Step 15 Insert Wooden Dowel (I) on the inside of all drawers, with the drawer inside the unit after having passed the wood dowel that is in the drawer slide. The dowel is not flush with the panel, it is a little inside the drawer to help when you need to remove the lock dowel to remove the drawer.
Page 20
You did it! Enjoy your new nightstand! 40 lbs 18 Kg 5 lbs 2,25 Kg Congratulations on you new piece of furniture! We would love to hear about it and see it. Please leave us a review or post a picture with #mywalkeredisonhome...
Page 21
ce t Call us at We are available to help Monday -Thursday 8am-5pm, 8am-3pm For cleaning, never use abrasives, use a soft cloth and water with neutral soap to clean the furniture.
Page 23
Spencer 1 Tiroirs Table de Chevet en Bois Massif Spencer 1 Cajones Mesita de Noche de Madera Maciza Pour usage résidentiel seulement Visite notre site Web pour obtenir les instructions les plus récentes, des conseils d'assemblage, signaler des dommages ou commander des pièces.
Page 24
électriques, règle-les sur le mode le plus lent. Fais attention à toi ! Les outils électriques peuvent provoquer des fissures ou endommager les meubles, mais aussi les autres composants s’ils sont mal utilisés. Les dommages causés par un outil électrique ne sont pas couverts par la garantie Walker Edison. Utilice las herramientas eléctricas con cuidado.
Page 25
# XXXXXXXXFF LOT: AA YY WW-XXXX Panneau Inférieur Distribution By: Date: MM/20YY Panel Inferior Walker Edison Furniture Company Rev. MM/20YY-VX COD. 1553 W 9000 S, West Jordan, Glissière en Bois UT 84088 United States CANFER compliant / conforme au CANFER...
Page 26
Liste de composants / Lista de hardware Partie Taille Quantité Parte Tamaño Nombre Cantidad Cheville 8x30mm Espiga Cheville 10x20mm Espiga 4x25mm Tornillo 3,5x30mm Tornillo M4x22mm Tornillo 4,5x45mm Tornillo Clou 10x10mm Clavo Poignée Manilla Cheville 8x40mm Espiga 7x80mm Tornillo Clé Allen Llave Allen Les quantités de composants indiquées ci-dessus sont nécessaires pour un assemblage correct.
Page 27
Étape / Paso 1 (FR) Commençons ! Insère les Chevilles (B) dans la Glissière en Bois (27). (ESP) ¡Manos a la obra! Inserta las Espigas (B) en la Corredera de Madera (27). Cheville en bois Espiga de madera Dica Les chevilles sont essentielles lors de l'assemblage de Las espigas son esenciales en el montaje de muebles meubles pour créer des connexions solides et précises.
Page 28
Étape / Paso 2 (FR) Insère également les Chevilles (A) dans la Barre Inférieure Avant (4), Barre Arrière (5), Barre Supérieure Avant (6), Côté Gauche du Tiroir (16), Côté Droit du Tiroir (18), Panneau Gauche (22), Panneau Droit (23) et Panneau Inférieur (25). (ESP) Inserta también las Espigas (A) en el Travesaño Inferior Frontal (4), Travesaño Trasero (5), Travesaño Superior Frontal (6), Lado Izquierdo del Cajón (16), Lado Derecho del Cajón (18), Panel Izquierdo (22), Panel Derecho (23) y Panel Inferior (25).
Page 29
Étape / Paso 3 (FR) Utilise les Vis (C) et une Clé Phillips pour fixer les Glissières (27), le Panneau Gauche (22) et le Panneau Droit (23) (ESP) Utiliza los Tornillos (C) y un Destornillador Philips para arreglar las Correderas (27) al Panel Izquierdo (22) y al Panel Derecho (23).
Page 30
Étape / Paso 5 (FR) Assemble la Barre Inférieure Avant (4), Barre Arrière (5), Barre Supérieure Avant (6) avec les Panneaux Latéraux (22, 23) en utilisant la Vis (D) et une Clé Phillips. (ESP) Monta el Travesaño Inferior Frontal (4), el Travesaño Trasero (5) y el Travesaño Superior Frontal (6) en los Paneles Laterales (22, 23) usando el Tornillo (D) y un Destornillador Philips.
Page 31
Étape / Paso 7 (FR) Utilise la Vis (D) pour fixer la Barre Supérieure Avant (6) à la partie montée. (ESP) Utiliza el Tornillo (D) para arreglar el Travesaño Superior Frontal (6) a la parte montada. Étape / Paso 8 (FR) Pour monter les pieds, assemble le Panneau du Pied (17) avec le Pied (8) en utilisant la Vis (J) et une Clé...
Page 32
Étape / Paso 9 (FR) Fixe les pieds montés (17,18) aux les Painéis laterais (22,23) en utilisant la Vis (F) et une Clé Phillips. (ESP) Fija los Pies montados (17,18) en los Paneles Laterales (22,23) usando el Tornillo (F) y un Destornillador Philips.
Page 33
Étape / Paso 11 (FR) Insère las Clavillas (A) dans le premier trou du Glissières en Bois (27) (ES) Inserte la Espiga (A) en el primer agujero de las Correderas de madera (27). FRONT Étape / Paso 12 (FR) Fixez le Côté Gauche du Tiroir (16) et le Côté Droit du Tiroir (18) au Façade du Tiroir (10) avec la Vis (D) et un tournevis Phillips. (ESP) Asegure el Lado Izquierdo del Cajón (16) y el Lado Derecho del Cajón (18) al Frente del Cajón (10) con Tornillos (D) y un destornillador Phillips.
Page 34
Étape / Paso 14 (FR) Fixez el Poignée (H) a la Façade de Tiroir (10) à l'aide des Vis (E) et d'un tournevis Phillips. (ES) Conecte la Manija (H) al Frente del Cajón (10) usando Tornillos (E) y un destornillador Phillips. Étape / Paso 15 (FR) Insérez la Cheville (I) à...
Page 35
Assembler des meubles peut parfois être compliqué. Notre équipe de service client, située dans l'Utah, est là pour obtenir des informations sur les produits, aider pour l'assemblage d'un produit ou pour tout autre problème de support client. Appelle-nous Envoie-nous les e-mails à Visite notre site accueil au client à...
Page 36
Tu as réussi ! Profite de ton nouveau Table de Chavet! ¡Lo ha conseguido! ¡Disfrute de su nueva Mesita de Noche! 40 lbs 18 Kg 5 lbs 2,25 Kg Bravo pour ton nouveau meuble ! Nous aimerions t'en entendre parler et le voir. S'il te plait, laisse-nous un commentaire ou publie une photo sur #mywalkeredisonhome ¡Enhorabuena por sus nuevos muebles!
Need help?
Do you have a question about the Spencer BR1DNS and is the answer not in the manual?
Questions and answers