Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for EKKO A25W
Summary of Contents for EKKO A25W
- Page 1 Scale Truck Model A25W/L Operation manual & Spare parts list...
- Page 2 Thanks for using our scale truck, which was designed to compact with long durable perfor- mance, easy operation and convenient maintenance. For your safety and correct operation, please read this instruction carefully before using. 1. Parameters Weighing capacity 4400Lbs /5500Lbs/6600Lbs Battery specification 7.4V Working time...
-
Page 3: Instrument Installation
3. Instrument installation install support base of instrument connect signal wire fix the screws of instrument housing 4. Handle installation... -
Page 4: Main Parameters
5. Main technical size 6. Main parameters Capacity 4400 5500 Fork width 22.44 27.56 22.44 27.56 Fork length 45.3 Min. height of fork 3.15±0.787 Overall Length... -
Page 5: Instruction Of Buttons
Weight Nylon 200/PU205 Nylon 205/PU215 Nylon 207/PU218 Nylon 231.5/PU242.5 7. Instruction of screen panel and buttons 7.1 Screen panel 7.2 Instruction of buttons TARE: used to deduct the weight of the container on the scale ZERO: confirm it is measured on the zero point COUNT: used for quantity sampling in counting function LB/KG:... - Page 6 8.1.2 ZERO Press【ZERO】before weighing product to ensure the scale is working from zero. 8.1.3 LB/KG selection Press 【lb/kg】to choose weighing units of kg and Lb. Each press can circularly display every time. Press 【lb/kg】for long term, the units can be selected into the unit shifts. When pressing 【lb/kg】, “u1-ON/OFF”...
- Page 7 Hold mode: peak retention mode Alar mode: upper and lower limit mode LP50 mode: selection mode of LP50 printing format 8.1.6 DNY mode Press 【FUN】for long term to enter setting, when it displays “2 dny”, press 【PRINT/ENT】to enter the dynamic measuring mode. Under this mode, interference can be eliminated better and more stably, and dynamic data can be measured, which is often used in functions such as weighing animals.
- Page 8 【FUN】can adjust the current value: When the lower limit is displayed, the lower limit value can be set. Press the【FUN】to en- ter the setting, and the【PRINT/ENT】can be shifted, and shifting to the end is to confirm the weight. After setting the lower limit value, press【PRINT/ENT】. When the upper limit is dis- played, you can set the upper limit value.
-
Page 9: Parameter Setting
setting Dynamic sensitivity 0-15 grade FC-al1 setting 1, L= XX The dynamic change weight does not exceed (XX) KG Dynamic mode set- Fd-dny range and will not be updated. ting 2, LOC: Locking mode Dynamic weight is locked after stabilization. 9. -
Page 10: Calibration Setting
Press printing After selecting the number, press printing to confirm un- 040.000 confirmation til F3 cap is displayed to return to the main menu Return to the main menu, enter the next level to set Press printing FUNs, do not enter the new setting, turn off and re- F3-cap confirmation start, and return to the weighing state... -
Page 11: Baud Rate Setting
Press the FUN to select 0~7, and level 7 is the bright- Press printing est. Press the print confirmation button to return to the confirmation main menu after selection Return to the main menu, enter the next level to set the Press printing FUN, do not enter the new setting, shut down and F7-led... - Page 12 Printing and communication protocol selection, 0-7 (see Appendix 2 for each protocol value), factory de- Press printing fault is 0, press the FUN to select, press the print con- confirmation firmation button after selection to return to the main menu Return to the main menu, enter the next level to set the Press printing FUN, do not enter the new setting, shut down and...
- Page 13 0: no communication 1: communication by pressing but- setting of communication tons F9-ode method 2: stable communication 3: continuous communication 4: command communication 5: warning communication setting of communication 0-9, Print protocol selection, covering all formats on the market FA-tpe protocol 9 is LP printing FB-al0 setting of range warning 0: within the range...
-
Page 14: Spare Parts Drawing
In this mode, press 【FUN】once to turn it on. Press again to turn it off. When the dynamic measurement is stable, the buzzer gives a short sound, indicating that the measurement is stable. The following two modes can be selected in parameter setting: 1, L= XX The dynamic change weight does not exceed (XX) KG range and will not be up- dated. - Page 15 bearing of large axle sensor fixing screws 12*30mm/8 shaft circlip fixing screws of weighing plate 10*30mm/4 bearing cover weighing plate rocker arm gauge assembly long shaft of rocker arm socket head cap screw 6*15mm/4 hole circlip socket head cap screw 10*20mm/3 connector fixed shaft instrument holder...
- Page 16 Oil cylinder Description Description cylinder pagoda spring 1/φ0.7*20 combined washer 1/φ10*2 screw plug 1/M20*1.5*12 screw combined washer 1/φ20*2 1/M10*1*9.5 1/φ35*263 1/φ5 piston rod steel ball cross sliding sleeve 1/φ35 steel ball washer 1/φ8*8 1/UHSφ35*43*7 safety valve spring 1/φ2*8*16.5 seal ring 1/φ65*2.65 adjusting screw O ring...
Need help?
Do you have a question about the A25W and is the answer not in the manual?
Questions and answers