Related Manuals for EKKO EA15 Series
Summary of Contents for EKKO EA15 Series
- Page 1 The Specification EA15 Series Semi-Electric Stacker Note: Before using must read this manual and the various warning label! EKKO Material Handling Equipment Manufacturing, Inc.
-
Page 2: Table Of Contents
Contents Preface ................... - 2 - 1. Structural data form ..............- 2 - 2. Safety guidance ................. - 3 - 3. Maintenance ................- 4 - 4. Control panel ................4/5 5. Troubles shooting ..............- 5 - 6. Parts List ..................- 6 - - 1 -... -
Page 3: Preface
Preface Welcome to use our semi-electric stacker EA series. The stacker is made of high quality steel and sped mast and was designed to give a durable, reliable and easy to use product. For your safety and correct operation, please carefully read this instruction book and warnings on the stacker before using it. -
Page 4: Safety Guidance
2. Safety guidance 2.1 Operator should read all warning signs and instructions here and on the stacker before using it. 2.2 Do not operate a stacker unless you are familiar with it and have been trained or authorized to do so. 2.3 Do not operate a stacker unless you have checked its condition. -
Page 5: Maintenance
3. Maintenance 3.1 Hydraulic oil Please check the oil level every six months. The oil can be hydraulic oil: ISO VG32, its viscosity should be 32cSt at 40 C, total volume is about 4.0lt. 3.2 Daily check and maintenance It is necessary to check the stacker daily. Special attention should be paid to the wheels, the axles, as thread, rags, etc., it may block the wheels, the fork and the mast, the chain, the battery should be checked, too. -
Page 6: Troubles Shooting
5. Troubles shooting Trouble Clause Fixing Methods The forks can’t be lift the max. -The hydraulic oil is not enough. -Pour in the oil. height. The forks cannot be lifted up. -Without hydraulic oil. -Fill in the oil. (Motor is rotary) -The oil has impurities. -
Page 7: Parts List
6. Parts List Specificatio Code Name Quantity GB/T 818-2000 Cross recess pan head screw M6×20 EA10.0-6 Guard clamp EA1016.0-4 Protective cover EA10.9-2 Electrical cover φ6 GB/T 96.2-2002 Large (big) plain washer GB 2674-86 Socket button head screws M10×25 EA10.4-3 Cover GB/T 276-94 Deep groove ball bearing 6205... - Page 8 TY-01.42 SPN charging plug GB/T 818-2000 cross recess pan head screw M4×20 GB 923-88 acorn nut GB 923-88 acorn nut GB/T 41-2000 Hex nut φ8 GB/T 93-1987 Spring washer φ8 GB/T 95-2002 Flat washer EA10.16.1 The door frame component GB/T 5781-2000 Hex bolt thread M10×55 EA10.0-2...
- Page 9 - 8 -...