Paper Jam (Single Sheets); Paper Does Not Move To Tear Off Position - TallyGenicom LA800+ User Manual

User guide
Problem

Paper jam (single sheets)

Paper does not move to tear off
position
Single sheet inserted
Corrective action
Open the top cover and remove the paper manually or with the
functions LF (line feed)/FF (form feed) in Offline mode from the
printer.
Before you replace the single sheet, refer to the instructions in the
section Single sheets
Pay attention to the following points:
Set single sheet feed to the corresponding paper width.
Insert the paper straight as far as possible.
Adjust the print head gap to the paper thickness (card-like pa-
per etc.) (if AGA=Off).
It is only possible to tear off when fanfold paper is used, refer to the
section Moving the paper to the tear position
(page 36).
Troubleshooting
(page 39).
110