Reference manual
Paper jam (single sheets)
Paper does not move to tear off
position
PRINT
BACK
Open the top cover and remove the paper manually or with the functions
LF (line feed)/FF (form feed) in Offline mode from the printer.
Before you replace the single sheet, refer to the instructions in the
section
Inserting paper – single sheets
Pay attention to the following points:
Set single sheet feed to the corresponding paper width.
Insert the paper straight as far as possible.
Adjust the printhead gap to the paper thickness (multiple forms, etc.).
Single sheet inserted.
It is only possible to tear off when fanfold paper is used, refer to the sec-
tion
Moving paper to the tear position
Troubleshooting
.
.
?
QUIT
100