Paper Jam (Single Sheets); Paper Does Not Move To Tear Off Position - TallyGenicom 2265+ User Manual

Troubleshooting
Problem

Paper jam (single sheets)

Paper does not move to tear off
position
Single sheet inserted
112
Corrective action
Open the top cover and remove the paper manually or with the
functions LF (line feed)/FF (form feed) in Offline mode from the
printer.
Before you replace the single sheet, refer to the instructions in the
section Single sheets, (page 39).
Pay attention to the following points:
Set single sheet feed to the corresponding paper width.
Insert the paper straight as far as possible.
Adjust the printhead gap to the paper thickness (card-like paper
etc.) (if AGA=Off).
It is only possible to tear off when fanfold paper is used, refer to the
section Moving the paper to the tear
User guide
position, (page 42).