Single Sheets - TallyGenicom 7265 Operator's Manual

Quick start-up

Single sheets

Some printer models are designed for fanfold paper operation only and therefore do not featu-
re a single sheet feeder. The front cover can therefore not be opened on these models.
Make sure that the printer is set to single sheet mode. If
necessary, change the paper type (see page 14, Changing the
paper type).
Press the latch at the middle of the front cover. The single
sheet input tray opens downwards.
Align the left paper guide with the mark on the left of the
single sheet input tray. Adjust the right paper guide to the
width of the paper used.
Paper handling
17