Supero SUPERSERVER 6025W-NTR+ User Manual page 54

S S
UPER ERVER 6025W-NTR+ User's Manual
Reboot Option
Setting jumper JP1 to Open (the default
setting) will allow the system to automati-
cally reboot after power-off. See the table
on the right for jumper settings.
Memory Voltage Select
Jumper JP2 allows the user to select the
memory voltage for the motherboard.
The default setting is Auto. See the table
on the right for jumper settings.
Reboot Option
Jumper Settings (JP1)
Setting
Off
On
Memory Voltage Select
Jumper Settings (JP2)
Setting
Pins 1-2
Pins 2-3
Open
5-22
Defi nition
Reboot
No Reboot
Defi nition
Auto
1.5V
1.8V