Table of Contents
Advertisement
S
S
UPER
ERVER 6025W-NTR+ User's Manual
Chassis Intrusion
The Chassis Intrusion header is des-
ignated JL1. Attach an appropriate
cable from the chassis to inform you
of a chassis intrusion when the chas-
sis is opened
Wake-On-LAN
The Wake-On-LAN header is desig-
nated JWOL on the serverboard. See
the table on the right for pin defi ni-
tions. You must also have a LAN card
with a Wake-On-LAN connector and
cable to use this feature.
Wake-On-Ring
The Wake-On-Ring header is desig-
nated JWOR. This function allows your
computer to receive and be "awak-
ened" by an incoming call when in the
suspend state. See the table on the
right for pin defi nitions. You must also
have a WOR card and cable to use
this feature.
Power Supply Fail LED
Connect a cable from your power sup-
ply to JP3 to provide warning of power
supply failure. This warning signal is
passed through the PWR_LED pin
to indicate of a power failure on the
chassis. See the table on the right for
pin defi nitions.
LAN1/2 (Ethernet Ports)
Two Ethernet ports (designated LAN1
and LAN2) are located beside the VGA
port on the I/O backplane. These ports
accept RJ45 type cables.
Chassis Intrusion
Pin Defi nitions (JL1)
Pin#
1
2
Pin#
1
2
3
Pin#
1
2
PWR Supply Fail LED
Pin Defi nitions (JP3)
Pin#
1
2
3
4
Note: This feature is only available when us-
ing Supermicro redundant power supplies.
5-16
Defi nition
Intrusion Input
Ground
Wake-On-LAN
Pin Defi nitions
(JWOL)
Defi nition
+5V Standby
Ground
Wake-up
Wake-On-Ring
Pin Defi nitions
(JWOR)
Defi nition
Ground (Black)
Wake-up
Defi nition
PWR 1: Fail
PWR 2: Fail
PWR 3: Fail
Signal: Alarm Reset
Advertisement
Table of Contents
