Table of Contents
Advertisement
S
S
UPER
ERVER 6025W-UR User's Manual
Adding an IDE Drive
1.
Remove the guide plates (one on each side) from the empty drive carrier and
screw them into both sides of the IDE drive using the holes provided.
2.
Slide the drive into the bay and secure it to the chassis with the drive carrier
screws you fi rst removed.
3.
Attach the power and data cables to the drive.
4.
Replace the top chassis cover before restoring power to the system.
Drives mount on rails and should "click" into place to be correctly and fully installed
in their bays.
Figure 6-5. Accessory Parts for Slim Floppy Drive
6-8
Advertisement
Table of Contents
