Page 1
DUSK.COM Range Name : Isabella Box 1 Dimensions : W60×D52.5×H22cm Product Dimensions: W45.5×D40×H55.2cm LIVING I BEDROOM I DINING Isabella Textured Bedside Up to 20 minutes Two person assembly time assembly This product is intended for domestic use only,not for commercial purposes.
Page 2
IMPORTANT ASSEMBLY TIP Before you begin, it's best to identify all of the parts and fittings to build your Isabella Textured Bedside frame. We advise laying these out on the floor to check you have everything, and to familiarise yourself with all of the parts and fittings before building.
Page 4
Parts list Before you begin building your Isabella Textured Bedside,please take a moment to read through the instructions and make surethat you have all the relevant parts listed on the parts check list. Part Number Part Description Quantity Box No...
Page 5
1. Attach parts to the bedside top. 2.Attach left and right side panel to the bedside top. M6*45mm Bolt Ø15x12mm Cam Lock Ø8x30mm Wood Dowel 4pcs 4pcs 2pcs 3. Assemble the back panel. 4.Attach bottom panel to the frame. 4mm Allen Key M7*40mm Screw Ø8x30mm Wood Dowel 2pcs...
Page 6
7. Attach upper drawer sides to upper 8. Insert the drawer bottom. drawer front. M6*45mm Bolt Ø15x12mm Cam Lock 4pcs 4pcs 9. Attach upper drawer back panel. 10. Attach the handle andcover side screws with covers. M4x38mm Screw M3.5x14mm Screw Handle Cover 4pcs...
Page 7
13. Attach lower drawer back panel. 14. Attach the handle and cover side screws with covers. M4x38mm Screw M3.5x14mm Screw Handle Cover 4pcs 2pcs 4pcs 15. The sliding module in the cabinet must be at the front end before assembly. Then attach drawers to the bedside.
Need help?
Do you have a question about the Isabella and is the answer not in the manual?
Questions and answers