Advertisement
Quick Links
DUSK . COM
LIVING BEDROOM DINING
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
60 minutes approx
assembly time
This product is intended for domestic use only , not for commercial purposes.
Corner Storage Unit
Two adults
assembly required
Range Name:ISLA
Box 1 Dimensions:W107 x D49 x H21(cm)
Product Dimensions:W40 x D40 x H172(cm)
Page 1-11
v-2.0
Advertisement
Related Manuals for DUSK ISLA Corner Storage Unit
Summary of Contents for DUSK ISLA Corner Storage Unit
- Page 1 DUSK . COM Range Name:ISLA Box 1 Dimensions:W107 x D49 x H21(cm) Product Dimensions:W40 x D40 x H172(cm) LIVING BEDROOM DINING Corner Storage Unit THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION PLEASE READ AND KEEP FOR FUTURE REFERENCE. 60 minutes approx...
-
Page 2: Care And Maintenance
Important Assembly Tip Before you begin, we advise laying everything out on a clean and soft level surface to avoid damaging the unit or your floor, It's best to identify all of the parts and fittings to build your Cabinet , and to familiarise yourself with all of the parts and fittings before building. Top Tip We recommend that you build your new Cabinet In the room you'd like it to be located. -
Page 3: Parts Checklist
Parts check list Page 3-11... - Page 4 Parts check list Before you begin building your Isla Corner Storage Unit Chest,please take a moment to read through the instructions and make sure that you have all the relevant parts listed on the parts check list. Part Number Part Description...
- Page 5 Step 1 6pcs 6pcs Attach board 5 to board 2 ， and use wooden dowel(C), and fix with screw(D) as shown. Step 2 8pcs 9pcs Attach board 1 to board 5 and board 2, and use wooden dowel(C), and fix with screw(D) as shown. Page 5-11...
- Page 6 Step 3 6pcs 4pcs 4pcs Screw eccentric rod (A) into board 6 at first, and attach board 6 to board 1 and board 2 bottom, use wooden dowel (C), and fix with screw (D) as shown. Step 4 2pcs 2pcs Attach board 3 to board 4 ，...
- Page 7 Step 5 2pcs 4pcs 4pcs Screw eccentric rod (A) into board 8 at first, flip to back, attach board 8 to board 3 and board 4 bottom, and use wooden dowel (C), and fix with screw (D) as shown. Step 6 4pcs 4pcs 4pcs...
- Page 8 Step 7 2pcs Attach board 7 to board 8, add cam lock(B) into board 7 and turn clockwise to tighten as shown. Step 8 6pcs 4pcs 4pcs Attach the upper and lower parts, and use wooden dowel (C). Add cam lock (B) into board 3, 4, 7, and turn clockwise to tighten.
- Page 9 Step 9 5pcs Insert metal dowel (F) into the hole on the board 3,4,7, and put board 10 into the cabinet,as shown. Step 10 8pcs 4pcs 4pcs 2pcs Fix hinge (J) into board 9 with screw (E), and fix handle (P) onto board 9 with screw (I), as shown. Page 9-11...
- Page 10 Step 11 16pcs Attach the doors onto the cabinet, fix the hinges (J) with screws (E), and adjust the doors' gap to a proper state according to the illustration. Page 10-11...
- Page 11 Step 12 2pcs 2pcs Drill holes on your wall, and install anti-tipping device as shown. Page 11-11...
Need help?
Do you have a question about the ISLA Corner Storage Unit and is the answer not in the manual?
Questions and answers