Wren Kitchens EASY-FIT Base Unit Fittings Manual page 9

Inserting the drawers
Slide the drawer onto the runners. Make sure
the runner mechanism and the drawer side
grooves line up.
Push the drawer back into the unit. After
it has been positioned on the runners, you
should hear a click.
Adding the drawer buffers
Add 1x door buffer to each side of each
drawer along the unit edge, as shown in the
diagram.
Adjusting the drawer frontal horizontally
(Easy-Fit)
Step 1 - Loosen the frontal screws on both
sides of the drawer box.
Step 2 - Adjust the drawer frontal left or right.
Step 3 - Re-Tighten the frontal screws on
both sides when in position.
Page 9