Subscribe to Our Youtube Channel
Related Manuals for Wren Kitchens Vogue WALL BASE UNIT 700 WALL
Summary of Contents for Wren Kitchens Vogue WALL BASE UNIT 700 WALL
- Page 1 WALL / SHALLOW BASE UNIT 700 - 800 Assembly Guide 700 WALL 800 BASE 800 WALL SHALLOW For Internal Use: FI.WR.INS.035_WKIN00125_MULTI_700-800_WALL_ShallowBASE_Rev8.indd...
- Page 2 WALL / SHALLOW BASE UNIT 700 - 800 Assembly Guide BEFORE YOU START INSTALLATION SHOULD BE PERFORMED BY A COMPETENT PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED Panel A Panel B Panel C Shelf Frontal x1 Back Panel x2 End Panel x2 Base Panel (packed separately)
- Page 3 Step 1. Step 2. Seat (G) Seat dowel (F) Seat cam dowel (G) into Cam Dowel into hole as into holes in both end holes in both end panels (B) shown. panels (B) as shown. as shown. Step 3. Attach panels x2 (C) to panel (B), using cam dowels (G) (in blue) and also using dowels (F) (in orange) in...
- Page 4 WALL / SHALLOW BASE UNIT 700 - 800 Assembly Guide Seat (G) Cam Dowel into hole as Step 6. shown. Seat dowel (F) into holes in both panels (B) as shown. Step 7. Seat cam dowel (G) into holes in both end panels (B) as shown.
- Page 5 Step 10. Ensure unit is square. From Top 94mm 126mm Step 11. Slide the back panel clips (T) into the groove of both panels (B) & (C)s. The back panel clips (T) should be evenly spaced as shown and positioned to allow the hanging brackets and corner gussets to be fitted.
- Page 6 WALL / SHALLOW BASE UNIT 700 - 800 Assembly Guide WALL UNITS ONLY for Shallow Base see pages 7 & 8 Care to be taken. Hanging procedure is necessary for a safe installation. Step 13. Hanging brackets steps a,b & c to be carried out on both sides as shown Detail A Detail A Detail A...
- Page 7 WALL UNITS ONLY Screws for attaching to walls are not provided as these vary depending on materials, thickness and construction. Ensure appropriate fixings for wall construction are used. Step 16. Measure appropriately and attach the 2 x hanging bracket Hanging Bracket plates onto the wall screwing Plate through the provided holes into...
- Page 8 WALL / SHALLOW BASE UNIT 700 - 800 Assembly Guide SHALLOW BASE UNITS ONLY for WALL see pages 5 & 6 Corner Gusset Detail Step 20. Secure corner gussets to the top left and right hand side of the wall unit using 4 x 15mm screws (L) per plate. View though Back Panel Step 21.
- Page 9 SHALLOW BASE UNITS ONLY Step 23. Secure each of the legs into place with 4 x 15mm screws (L) per leg. Ensure legs are rotated as shown so that part of it is supporting the end panels (B). Step 24. Push leg firmly down into leg base.
- Page 10 WALL / SHALLOW BASE UNIT 700 - 800 Assembly Guide Step 25. Insert hinge in top & bottom holes as shown below. Step 26. Secure hinges by tightening 2 x screws with hinge dowels attached. These are already positioned within the hinges. Step 27.
- Page 11 Page 10 For Internal Use: FI.WR.INS.035_WKIN00125_MULTI_700-800_WALL_ShallowBASE_Rev8.indd...
Need help?
Do you have a question about the Vogue WALL BASE UNIT 700 WALL and is the answer not in the manual?
Questions and answers