HunterLab ColorFlex L2 User Manual page 25

All views are displayed in the middle of the Tool Bar.
•
View Editing: Tap the current view (with the pencil icon) to edit. Alternatively, tap
another view to load it first, then tap again to open the view options. After editing, press
the left arrow at the top of the screen or tap anywhere on the view screen to exit.
•
Add/Remove: tap the plus icon to change or add views.
Views: EZ VIEW
This view provides a straightforward display of STANDARD vs. SAMPLE comparisons and
PASS/FAIL results.
Overview
Sample Name Box
Located at the top-left corner of the screen, this box allows you to edit the sample
name, delete it, or set it as the standard by tapping on it. The box is highlighted with a
color corresponding to the measured color, offering a quick visual reference.
Information Area
Located at the top-right corner of the screen, this area displays the instrument's serial
number, time, date, and Pass/Fail status. If the measurement is a standard, it will be
labeled as Standard in this area.
Edit EZ View
To edit, click the pencil icon in the EZ VIEW tab. At the bottom of the screen, you will find
options to edit settings including:
Color Scales:
Select one or multiple tristimulus Color Scales to display.
Differences And Indices:
To select DIFFERENCES and INDICES to display (go to WorkSpace to add first If not
already selected in WorkSpace).
Display Options:
Includes SHOW STANDARD, SHOW DIFFERENCES, SHOW COLOR PLOT, and adjusting
PRECISION.
Color Difference Plot
Selecting SHOW COLOR PLOT displays the color difference plot in EZ View, which auto-
scales to show differences. Tapping the plot also initiates auto-scaling.
User's Manual for ColorFlex L2 and EasyMatch Essentials V 1.0
Views
25