HunterLab ColorFlex L2 User Manual page 20

▪ Reordering Views
Tap and hold a selected view, then drag it to the desired position. .
Saving Changes
▪
Press SAVE to apply changes. Once saved, use the tabs in the Tool Bar to
navigate between views. .
Note: Each view can only be opened in one tab. Essentials does not support
Editing Views
▪ The view currently displayed on the screen is the active view in Essentials.
▪ Only the active view shows a pencil icon in its tab. Tap the pencil icon to edit the
view. .
▪ If a view is not active, tap it first to display it, then tap it again to access its
editing options.
▪ Press the left arrow at the top of the screen, or anywhere on the view screen to
exit View Options.
Tool Bar: HunterLab Icon
The HunterLab Icon is located at the top-right corner of the screen. .
Wizard Access
Tap the HunterLab icon to start the wizard. This feature guides you through a series of
screens highlighting the software's features. To exit, tap the X at the top of the screen. .
Screen Capture
Press and hold the HunterLab icon to enable the screen capture function. Tap Screen
Capture, and the image of the current screen will be saved to an attached flash drive. .
Note: Other features under HunterLab icon are under development.
20
User's Manual for ColorFlex L2 and EasyMatch Essentials V. 1.0
multiple tabs with the same type of view.
Figure 5. Screen Capture