Advertisement
Available languages
Available languages
Page 1 of 17
CP0588
FITTING INSTRUCTIONS FOR CP0588
AERO-STYLE CRASH PROTECTORS
T
.
HIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE
S
.
OME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY
D
.
O NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT
P
.
LEASE READ ALL INSTRUCTIONS BEFORE PROCEEDING
IF IN ANY DOUBT WHEN FITTING OUR PRODUCTS, CONSULT ONE OF OUR DEALERS
OR HAVE FITTED BY A QUALIFIED TECHNICIAN.
P
LEASE NOTE THAT THE WAY THE KIT IS PACKED DOES NOT NECESSARILY REPRESENT THE WAY OF
.
MOUNTING TO THE BIKE
I
,
N THE EVENT OF RUBBER WASHERS BEING USED TO HOLD COMPONENTS ONTO BOLTS
.
THESE RUBBER WASHERS CAN BE THROWN AWAY
DIGITAL COPIES OF THESE INSTRUCTIONS ARE AVAILABLE FROM:
WWW.RG-RACING.COM
Racing Technique Ltd t/A R&G
Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ
Tel: +44 (0)1420 89007
www.rg-racing.com
Email:
infor@rg-racing.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for R&G CP0588
Summary of Contents for R&G CP0588
- Page 1 Page 1 of 17 CP0588 FITTING INSTRUCTIONS FOR CP0588 AERO-STYLE CRASH PROTECTORS HIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE OME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY O NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT...
-
Page 2: Tools Required
Page 2 of 17 CP0588 TOOLS REQUIRED GENERAL TORQUE SETTINGS 17mm A/F SOCKET & WRENCH M4 BOLT = 8Nm • M5 BOLT = • T50 TORX TOOL M6 BOLT = 5 & 8mm A/F ALLEN TOOL • M8 BOLT = 20Nm TORQUE WRENCH •... - Page 3 Page 3 of 17 CP0588 AERO-STYLE CRASH PROTECTOR ORIENTATION LHS EXPLODED ASSEMBLY Racing Technique Ltd t/A R&G Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ Tel: +44 (0)1420 89007 www.rg-racing.com Email: infor@rg-racing.com...
- Page 4 Page 4 of 17 CP0588 RHS EXPLODED ASSEMBLY FITTING PICTURES Picture 1 Picture 2 Racing Technique Ltd t/A R&G Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ Tel: +44 (0)1420 89007 www.rg-racing.com Email: infor@rg-racing.com...
- Page 5 Page 5 of 17 CP0588 Picture 3 Picture 4 Picture 5 Picture 6 Picture 7 Picture 8 Racing Technique Ltd t/A R&G Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ Tel: +44 (0)1420 89007 www.rg-racing.com Email: infor@rg-racing.com...
- Page 6 Page 6 of 17 CP0588 Picture 9 Picture 10 Picture 11 Picture 12 Picture 13 Picture 14 Racing Technique Ltd t/A R&G Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ Tel: +44 (0)1420 89007 www.rg-racing.com Email: infor@rg-racing.com...
-
Page 7: Fitting Instructions
Page 7 of 17 CP0588 FITTING INSTRUCTIONS Before fitting the R&G crash protectors, it is advised that a jack is positioned • underneath the bike at a suitable point to support the weight of the engine during fitment. A small piece of wood should also be placed between the jack and the mounting point to help to spread the load. - Page 8 Page 8 of 17 CP0588 • Offer the assembly up to the rearmost engine mounting hole and loosely tighten in position using an 8mm Allen tool, leaving enough room to access the front engine mounting bolt. Tuck the mounting block under the clutch cable to ensure it’s under no strain.
- Page 9 Page 9 of 17 CP0588 NOTICE DE MONTAGE CP0588 PROTECTIONS CRASH E KIT CONTIENT LES ARTICLES ILLUSTRES ET ETIQUETES SUR LA PAGE ERTAINES PARTIES PEUVENT ETRE PRESENTES UNIQUEMENT POUR LA CLARTE DES INSTRUCTIONS E PAS PROCEDER AU MONTAGE TANT QUE VOUS N...
-
Page 10: Outils Requis
Page 10 of 17 CP0588 OUTILS REQUIS VALEURS DE SERRAGE M4 BOULON = 8Nm CLE À CLIQUET + DOUILLE 17mm • M5 BOULON = 12Nm • CLÉ TORX T50 M6 BOULON = 15Nm CLÉ ALLEN 5 & 8mm • M8 BOULON = 20Nm CLÉ... - Page 11 Page 11 of 17 CP0588 ORIENTATION DE LA PROTECTION CRASH ASSEMBLAGE CÔTÉ GAUCHE Racing Technique Ltd t/A R&G Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ Tel: +44 (0)1420 89007 www.rg-racing.com Email: infor@rg-racing.com...
- Page 12 Page 12 of 17 CP0588 ASSEMBLAGE CÔTÉ DROIT PHOTOS DE MONTAGE Photo 1 Photo 2 Racing Technique Ltd t/A R&G Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ Tel: +44 (0)1420 89007 www.rg-racing.com Email: infor@rg-racing.com...
- Page 13 Page 13 of 17 CP0588 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8 Racing Technique Ltd t/A R&G Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ Tel: +44 (0)1420 89007 www.rg-racing.com Email: infor@rg-racing.com...
- Page 14 Page 14 of 17 CP0588 Photo 9 Photo 10 Photo 11 Photo 12 Photo 13 Photo 14 Racing Technique Ltd t/A R&G Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ Tel: +44 (0)1420 89007 www.rg-racing.com Email: infor@rg-racing.com...
-
Page 15: Notice De Montage
Page 15 of 17 CP0588 NOTICE DE MONTAGE Avant de monter les protections crash R&G, il est conseillé de positionner un cric sous • la moto à un endroit approprié pour supporter le poids du moteur pendant le montage. Un petit morceau de bois doit également être placé entre le cric et le point de montage pour aider à... - Page 16 Page 16 of 17 CP0588 Placez une rondelle M10 (article 16) sur le boulon M10 de 50 mm (article 12), puis placez-la • dans le trou arrière du bloc de montage côté droit (article 2). Placez ensuite l'entretoise arrière droite (article 5 = 10 mm) sur le filetage exposé comme indiqué sur le SCHÉMA D'ASSEMBLAGE CÔTÉ...
- Page 17 Page 17 of 17 CP0588 its liability for causing death and personal injury, it shall not be liable for indirect or consequential loss and otherwise its liability shall be limited to the amounts paid by the Buyer for the Products or the fitting or service concerned. These terms do not affect the Buyer’s statutory rights.
Need help?
Do you have a question about the CP0588 and is the answer not in the manual?
Questions and answers