Ironmaster Quick-Lock Ultimate Training Vest 40 Operating Instructions

Ironmaster Quick-Lock Ultimate Training Vest 40
Congratulations on your purchase of this fine Ironmaster product. Be sure to read and understand the
operating instructions to achieve the best performance and avoid injury.
This weight vest is intended only for use with the Ironmaster Quick-Lock Dumbbell weight plates.
For further details and information please visit our website at www.ironmaster.com.
For customer service, contact your local distributor or:
Ironmaster LLC,14562 167th Ave SE Monroe, WA 98272 USA
www.ironmaster.com Email: contact@ironmaster.com Tel: 800-533-3339 or 1-360-217-7780
Operating Instructions
Using the Torso Straps:
The main lower straps must always be used. The up-
per strap is optional and intended for use in more dy-
namic exercising to hold the vest more securely to the
body.
The main lower straps are made in two parts so you
can adjust the length and location in the front and
back. Depending on your body size you may need to
overlap the strap ends. It is recommended to set the
straps on the back of the vest first, then put on the
empty vest and find where the best front location is
for the Velcro. Adjust the back Velcro locations if
needed. Then to put on the vest, leave the straps at-
tached on the back and lift it carefully over your head
and pull the straps around to the front and secure.
Attach the strap with hook Velcro facing out first then
attach the other strap on top as shown.
The included OPTIONAL use upper straps are also
made in two parts and must attach to each other in
the back and front. We recommend locating this
smaller strap as shown above. Not needed for most
vest training uses but available for a more secure fit.