Ironmaster Leg Attachment Assembly & Operating Instructions

For the super bench pro (sold separately)

Congratulations on your purchase of this fine Ironmaster product. Be sure to read and understand the

operating instructions to achieve the best performance and avoid injury.

3rd notch

Description:

This LEG ATTACHMENT is for performing seated leg exten-

sion and leg curl exercises. Note: It is designed to be used

with the Ironmaster Super Bench PRO only with it's lower

bench height. This attachment is designed to be used with the

bench in the 10 degree Incline position as shown above (3rd

notch position). The SUPPORT FOOT of the attachment must

touch the floor.

Do you have a question about the Leg Attachment and is the answer not in the manual?

Page 1 Ironmaster Leg Attachment for the Super Bench PRO (Sold separately) Congratulations on your purchase of this fine Ironmaster product. Be sure to read and understand the operating instructions to achieve the best performance and avoid injury. SUPPORT FOOT must touch floor...
Page 2 Assembly: Make sure all parts are present in the box and Bolt pack. Step one: Insert LOWER FRAME STUB into Super Bench PRO Receiver Tube for ease of assembly. This will help hold in place during assembly. Refer to Super Bench PRO owners manual “Using the Super Bench PRO with accessories”...
Page 3: Warranty Information
10 years for frame and structural components. Shipping costs are not included in the warranty and some items may need to be sent to Ironmaster for repair or replacement. I n stallation of any parts and labor involved is not included. The warranties described above shall be the sole and exclusive remedy available to the pu rchaser. Correction of...