Ironmaster Super Bench PRO Assembly & Operating Instructions

Congratulations on your purchase of this fine Ironmaster product. Be sure to read and understand the

operating instructions to achieve the best performance and avoid injury.

Description:

This adjustable exercise bench is designed to be used for dumbbell training, in a rack or cage for barbell training, or with

many various optional attachments. It is a heavy duty multi use bench with 11 angle positions and includes a removable

incline seat. Some tools are required for assembly as indicated in the following steps. The maximum load capacity

including the user is 1000 LBS/450 KGS in the flat position and 600 LBS/270 KGS when tilted or the incline seat is used.

1x Bolt Pack

and Ironmaster

Emblem

1x Instruction manual (Not Shown)

Assembly & Operating Instructions

Ironmaster Super Bench PRO

Incline Seat shown on bench

1x Super Bench frame

Bench Main Pad

2x Super Bench Foot

1x Incline Seat

Incline Seat

1x Ironmaster Emblem

4x M12 x

100mm Hex Bolts

4x M12 Nylock nuts

8x M12 Washers

NOTE:

2x 19mm box wrench or Ratchet

wrench (Not included) required

for assembly

Table of Contents

Do you have a question about the Super Bench PRO and is the answer not in the manual?

Page 1 Assembly & Operating Instructions Ironmaster Super Bench PRO Congratulations on your purchase of this fine Ironmaster product. Be sure to read and understand the operating instructions to achieve the best performance and avoid injury. Description: This adjustable exercise bench is designed to be used for dumbbell training, in a rack or cage for barbell training, or with many various optional attachments.
Page 2 Failure to locate properly my result in the locking lever slipping out of position during use. If the locking ring cannot locate correctly please see troubleshoting. Should these adjustments fail to solve the problem, discontinue use and contact Ironmaster for further assistance.
Page 3 The Ironmaster Super Bench PRO is designed to accommodate an array of attachment (Note only Ironmaster attach- ments are to be used with the Super Bench PRO). Located at the front of the Super Bench PRO is the receiver tube which will accommodate most Ironmaster attachments (except the Leg attachment , which will uses a Leg Attachment designed specifically for the lower bench height of the Ironmaster Super Bench PRO).
Page 4 10 years for frame and structural components. Shipping costs are not included in the warranty and some items may need to be sent to Ironmaster for repair or replacement. I n stallation of any parts and labor involved is not included. The warranties described above shall be the sole and exclusive remedy available to the pu rchaser. Correction of...