ray RAYSCAN OBJECT SCAN User Manual page 78

OBJECT SCAN 6 The operation of RAYDENT Converter
7
8
9
10
Alignment points should be selected in
the same order for both left and right for
alignment of two objects. If not done
properly, the alignment may not work.
For maxilla alignment, align by moving
the bite to the maxilla, which is the fixed
reference.
After selecting the alignment points,
press the [
start aligning.
If the alignment did not work properly, go
back to Step 5 and try again.
If the alignment worked properly, move
on to the next step of the mandible
alignment.
78
] button to