ray RAYSCAN OBJECT SCAN User Manual page 29

4.3.4 Calibration
No.
1
2
3
4
OBJECT SCAN 4 How to use RAYSCAN Object Scan
Figure
Select the scanned item and click the
[Calibration] button.
The Material Config screen is displayed.
If nothing is registered, only new addition
items will be output, and then you can
select and update existing material type.
Note: Material names can only be in
English, and special characters and
spaces are not allowed. Numbers are
only available after the English alphabet.
Proceed with calibration.
When the calibration is completed, a
completion message is displayed.
29
Description