ray RAYSCAN OBJECT SCAN User Manual page 65

6.4.6 Cutting
Provides the function to cut the object into two or more pieces.
No.
1
2
3
4
OBJECT SCAN 6 The operation of RAYDENT Converter
Figure
Press the [
Mouse-left button allows to add a cutting-
point. Draw more than 2 points to cut the
desired area.
Object-orientation cannot be adjusted
while drawing the cutting points.
When the initial point is selected while
drawing more than 3 points, the selected
area is fixed.
Mouse-right button allows to delete the
last added points in order.
ESC button deletes alll added points at
one time.
65
Description
] button to use the cut tool.