USER MANUAL Table of Contents Safety Information What’s Included Specifications Main Power Connection DMX Connection Display Control Display Settings DMX Profile Size And Weight Cleaning Installation Parts & Accessories Warranty Customer Support...
And there is protection against water spray from entering the fixture from any direction. What is Included 1pc Outshine Flash Strip TW fixture 1pc Diffusion 1pc Nema 5-15 to SAC3Fx-67...
Specifications Part Number Fixture ID 7229 - Outshine Flash Strip TW Mechanical Specifications Housing: Die-Cast Aluminum Mounting System: Adjustable Mounting Yoke Power Connection: Seetronics SAC3MPX Input (Nema 5-15 to SAC3Fx-67 cable included) Signal Connection: 5 Pin XLR In and Out...
Main Power Connection Caution! Do not connect to a dimmer system. Connection points must not be exposed to moisture or liquids. Use appropriate connections rated for indoor use. This unit has auto switching power supply. It will respond to 90-264V AC 50/60Hz automatically Replace Fuse with specific type and rating.
Display Control Reset 180 30° C DMX Display Unlock: Down Enter Down Menu Advan The control board on the fixture base is your interface to access and control all the functions on the unit. It’s LCD display gives you a code view of the options and functions.
Page 6
Display Settings 30° C DMX Reset 180 Manual: Gives you operational control over the fixture via display. Menu Advan Menu Manual: Select the Channel you wish to adjust. Us the up/down button to select the function setting from 0-255 1 Dimmer 2 Red 3 Green 4 Blue...
Page 7
Display Settings Reset 180 Advance: Advance Factory Settings, please reach out to customer service for more information. Menu Advan Reset 180 180: Invert Display 180 degrees. Menu Advan Reset 180 Reset: Reset Display Settings. Menu Advan...
DMX Profile Outshine Flash Strip TW Channel Channel Channel Channel Function Description Value Init Value Mode Mode Mode Mode Dimmer Dimmer Off to Full (front leds) 0-255 LED Intensity Red LED Intensity 0-255 LED Intensity Green LED Intensity 0-255 LED Intensity...
Installation Caution! 1. The Installation must be carried out by an authorized dealer or trained professional. 2. Unit may cause severe injures, if you have doubts concerning the safety do not install. 3. Unit is to be 24 inches away from flammable materials. 4.
Customer Support MEGA Lite has a customer support line to provide set-up help and to answer any questions should you encounter a problem. Please visit our website for any other related technical documents. For service related issues, please contact our service dept.
Need help?
Do you have a question about the Outshine Flash Strip TW and is the answer not in the manual?
Questions and answers