Parts required TIMBERS QTY x 2 QTY x 3 DEE1 DEE4 (90mm x 90mm) 3000mm (120mm x 90mm) 2400mm QTY x 2 QTY x 2 DEE2 DEE5 (90mm x 90mm) 3000mm (90mm x 90mm) 2400mm Including swing hanger both QTY x 2 QTY x 2 DEE3 DEE6...
Page 3
Parts required (M12 x 200 square cup hex bolt) (FM80 ‘BRASS SCREW’) (BLUE end caps) SMALLER CAPS (PRE-ASSEMBLED TYRE ROPE) (Chain x 770mm Inc. thread bar /nylocs) (NET) (960 STANDARD BAR) (M12 NYLOC) (QUICKLINK ) (end caps) pg 3 of 10 REF: CF101 - DEE CLIMBING FRAME...
Foundation details NOTES: SMALL CIRCLES SHOWN ABOVE ARE FOR TYRE CHAIN GROUND LEVEL SOIL TIMBER SUPPORT POST CONCRETE pg 4 of 10 REF: CF101 - DEE CLIMBING FRAME...
Surfacing details = MINIMUM SPACE = SURFACING AREA pg 5 of 10 REF: CF101 - DEE CLIMBING FRAME...
Page 6
Assembly instructions Install the timbers (DEE1,DEE2,DEE3) DEE3 DEE2 DEE3 DEE1 DEE1 DEE2 Attach the Timber (DEE5) to the Timbers (DEE1,DEE2,DEE3) Using M12 CUP SQUARE BOLTS / NYLOCS / END CAPS pg 6 of 10 REF: CF101 - DEE CLIMBING FRAME...
Page 7
Assembly instructions Attach the Timber (DEE9) to the Timbers (DEE3) Using M12 CUP SQUARE BOLTS / NYLOCS / END CAPS Attach the Timber (DEE4) to the Timbers (DEE1) Using M12 CUP SQUARE BOLTS / NYLOCS / END CAPS WITHOUT SLAT pg 7 of 10 REF: CF101 - DEE CLIMBING FRAME...
Page 8
Assembly instructions Attach the NET to the Timbers (DEE4,DEE9) Using NYLOCS / END CAPS Attach the BARS to the Timbers (DEE1-DEE2,DEE2-DEE3) Using BRASS ‘SCREWS’ 1085mm from the TOP DE5 TIMBER pg 8 of 10 REF: CF101 - DEE CLIMBING FRAME...
Page 9
Assembly instructions Attach the TYRE - ROPE to the TOP PIECE (DEE5) Use LOCK TIGHT to ensure the quick link remains CLOSED pg 9 of 10 REF: CF101 - DEE CLIMBING FRAME...
Need help?
Do you have a question about the DEE CLIMBING FRAME CF101 and is the answer not in the manual?
Questions and answers