Related Manuals for Patriot Lighting SO13
Summary of Contents for Patriot Lighting SO13
- Page 4 place it on a soft surface or on the...
- Page 5 parts. Loosen both of screws and remove Save the parts. the ball from the downrod. Loosen the screws. (5'' and 10'' to be option).
- Page 6 Insert the downrod into the fan, then install the bolt and the R type pin. on the downrod. on the downrod. and canopy cover on the downrod. on the downrod.
- Page 7 through the downrod. inside the ball. Tighten both of screws.
- Page 8 before making wire connection. GREEN/YELLOW 3. Installing receiver in ceiling fan...
- Page 9 Connect the black and white wires from the receiver and house. Connect ground wire from outlet box to green wires from mounting bracket, ball and receiver. Install the canopy over the mounting bracket and Install the screws halfway into the tighten the screws.
- Page 10 Put a washer on each hole of the gasket. holes of the blade. Lossen the screws of the bowl hood and Insert screws in gasket holes and tighten. remove one of them. panel on the bowl hood from fan to LED light kit.
- Page 11 on the lamp pan. Soft white light / Bright white light / Daylight Transmitter Install 2*1.5 volt AAA batteries(not included). (To prevent damage to transmitter, remove the batteries if not used for a long time. forward/reverse Store the transmitter away from excessive heat or humidity.
-
Page 12: Turn On The Power Switch
If the remote does not work: 1. Turn on the power switch. The light is turned ff and the the fan is turned on. 2. After turning on the power switch, ff and the When the light is turned speed setting fan is turned on, the code-matching is successful. - Page 13 eliminated...
Need help?
Do you have a question about the SO13 and is the answer not in the manual?
Questions and answers