PEAKnx Controlmicro Getting Started page 24

Technical support
How do I install the YOUVI Server on the Controlmicro?
Currently, our customers can choose which visualisation they want to install on the panel. The-
refore, YOUVI is supplied with the panels but not pre-installed. The YOUVI Client (YOUVI Panel)
is installed on the Controlmicro by default, as a minimal installation of the YOUVI software is
necessary to enable control of the ambient lighting and sensor display for the user. To use the
YOUVI server on the Controlmicro, run the installer again. You will find it as an autostart file in
the PEAKnx folder on the desktop. Select the option "Convert YOUVI Client to YOUVI Server"
during "Pre-installation". Afterwards, upload your KNX project to continue with the setup. During
the installation process you will be asked whether you want to repair, uninstall or skip the client.
Select "Skip".
Note: Everything else about the start with YOUVI can be found in the also delivered short


guide.
Technical support
If you experience problems with your Controlmicro, please contact our PEAKnx Support Team:
− Mail: support@peaknx.com
− Create a Support Ticket: support.peaknx.com
− Phone: +49-6151-279 1825
24