PEAKnx Controlmicro Getting Started page 16

Legal notes
Note: Detailed instructions can be found on the supplied USB flash drive.


Avoid damage to the panel due to incorrect use!
Do not use device in safety-relevant, humid, dusty, or vibration-loaded environments
▪
and not under direct sunlight.
▪ Do not allow small children to operate the device!
▪ Do not make any changes, attachments, or conversions to the device
To minimise the risk of burn-in and excessive heat generation, the screen of this
▪
device is configured to switch off automatically after a certain period of inactivity.
This not only protects the screen, but also extends the overall lifespan of the device.
Please note that this function helps to save energy and optimise the performance of
the device. We recommend that you do not switch off the proximity sensor completely
under Panel Settings (Control Micro / Control 12) and that you do not deactivate the
screen switch-off function.
Delivery
▪ Controlmicro panel
▪ USB flash drive: YOUVI Basic software package, Controlmicro user manual
▪ Brief instructions for commissioning the panel and software
Connectors for power supply (only 24 V variant; PNX13-10001) and KNX
▪
Circuit board for network connection
▪
Screws to secure the panel against theft, including tools
▪
▪ Adapter cable from USB type C to USB type A
Caution
16