PEAKnx Controlmicro Getting Started page 22

Initial commissioning and operation
Switching On
The panel turns itself on after the fuse is turned on.
Note: In normal operating conditions it is not necessary to switch off the Controlmicro.


If you need to restart the panel after shutdown, there are 2 ways:
a) Disconnect the circuit breaker of the panel.
− This procedure is suitable if the anti-theft screws have been used.
b) Disconnect the panel from the mounting plate so that the power supply is cut off.
Then reconnect the panel to the mounting plate or turn the fuse back on.
▪
The panel starts.
Switching Off
▪ Tap the Windows logo on the Windows Start screen, select the On/Off icon and select the
option "Shut down".
Controlmicro panel settings
This tool gives you access to the CO2
value and to the brightness value, to
the ambient light and the proximity
sensor.
In the taskbar you have access to the
application:
22