Generac Power Systems RG02224 Owner's Manual page 21

Securing the Generator
Proceed as follows to secure generator:
1. Use key to install left and right side access panels.
2. Close viewing window.
NOTE: See Figure
hasp, if not installed. With retaining tab at the bot-
tom, insert square end of hasp into slot below view-
ing window. Push on hasp until it snaps in place.
Gently pull on hasp to verify that it will not come
free.
Figure 3-7.
Figure 3-7. Install Viewing Window Hasp
3. Install customer supplied padlock into hasp.
Spark-Ignited Stationary Generators Owner's Manual
3-7. Obtain viewing window
006376
Activation and Startup
21