Generac Power Systems RG02224 Owner's Manual page 32

Maintenance
8. Place a DO NOT OPERATE tag or placard on both
control panel and transfer switch.
9. If unit has been running, wait five minutes for en-
gine to cool.
30 Hour Break-In
Perform the following task:
• Replace Lubricating Oil and Oil Filter
NOTE: See Replacing Lubricating Oil and Oil Filter
under Schedule A Maintenance.
Daily Maintenance
Perform the following tasks daily:
• Inspect enclosure louvers
• Inspect fuel lines
• Inspect coolant level and hoses
• Inspect radiator for clogging
• Inspect lubricating oil level and drain hose
NOTE: See Inspecting Enclosure Louvers
specting Coolant Level and Hoses
Maintenance.
32
through In-
under Schedule A
Spark-Ignited Stationary Generators Owner's Manual