1. Manuals
  2. Brands
  3. Landoll Manuals
  4. Seeders
  5. Till 'N Seed BPS6
  6. Operator's manual

Landoll Brillion Till 'N Seed BPS6 Operator's Manual

Hide thumbs Also See for Brillion Till 'N Seed BPS6:
Table of Contents

Advertisement

Quick Links

Download this manual
'
Till 'N Seed
®
Models BPS6 and BPSB6
Operator's Manual
LANDOLL COMPANY, LLC
1900 North Street
Marysville, Kansas 66508
(785) 562-5381
800-428-5655 ~ WWW.LANDOLL.COM
3P091-2409

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Brillion Till 'N Seed BPS6 and is the answer not in the manual?

Questions and answers

Related Manuals for Landoll Brillion Till 'N Seed BPS6

Summary of Contents for Landoll Brillion Till 'N Seed BPS6

  • Page 1 ‘ Till 'N Seed ® Models BPS6 and BPSB6 Operator’s Manual LANDOLL COMPANY, LLC 1900 North Street Marysville, Kansas 66508 (785) 562-5381 800-428-5655 ~ WWW.LANDOLL.COM 3P091-2409...

  • Page 2: Instructions For Ordering Parts

    Instructions for Ordering Parts ** Repair parts must be ordered through an authorized dealer ** DEALER INSTRUCTIONS FOR ORDERING PARTS FROM LANDOLL PARTS DISTRIBUTION CENTER PHONE #: 800-423-4320 OR 785-562-5381 FAX #: 888-527-3909 ORDER ONLINE: Dealer.landoll.com DATA PLATE The Data Plate, which lists the model and serial number of the equipment, ®...
  • Page 3 DANGER DO NOT operate or perform any maintenance tasks on this equipment until you have completed the following: 1. Receive proper training to operate this equipment safely. 2. Read and understand the operator’s manual. 3. Be thoroughly trained on inspection and repair procedures. Failure to comply with this warning may result in serious injury or possibly death.
  • Page 5 Table of Contents Safety Information Introduction ............1-1 Description of Unit .
  • Page 6 TABLE OF CONTENTS Loup Acre Meter Kit - Optional (After 05/15/2012) ......3-18 Settings for Loup Acre Meters ........3-18 Field Acres .

  • Page 7: Warranty Registration

    Failure to comply with this warning can result in within 10 days of retail purchase, using the Landoll personal injury or death, damage to the machine Company, LLC Ag Products on-line registration process.

  • Page 8: Transporting Safety

    TABLE OF CONTENTS SAFETY INFORMATION Safety • When applying decals to the implement, be sure to clean the surface to remove any dirt or residue. Where possible, sign placement should protect the NOTE sign from abrasion, damage, or obstruction from mud, Investigation has shown that nearly 1/3 of all farm dirt, oil etc.

  • Page 9: Protective Equipment

    TABLE OF CONTENTS SAFETY INFORMATION Safety Instructions for Towing Vehicles Insert Rockshaft Rockshaft Lock Detent Pin Detent Pin The maximum travel speed is the lesser of Storage • The limit of the road conditions; • The maximum specified ground speed; —...

  • Page 10: Safety Information

    TABLE OF CONTENTS SAFETY INFORMATION Decals IMPORTANT PARKING LIFT FROM HERE ONLY STAND ITEM 6 - 6K008 DO NOT LIFT DO NOT LIFT FROM HERE 45° MIN FROM HERE 3P078 WARNING ITEM 4 - 3P078 FOR TIE FOR TIE DOWN ONLY DOWN ONLY TO PREVENT DAMAGE TO MACHINE: LIFT AND TIE MACHINE DOWN ONLY...
  • Page 11 TABLE OF CONTENTS SAFETY INFORMATION A LANDOLL PRODUCT 193500 ITEM 10 - 193500 ITEM 11 - 3P157 ITEM 14 - 528934 ITEM 15 - 528933 ITEM 16 - 528938 ITEM 17 - 3P160 ITEM 18 3P076 MEMBER ITEM 21 - 3P159...
  • Page 12 TABLE OF CONTENTS SAFETY INFORMATION Indicator Large Seed Meter Indicator Figure 1-5: Meter System Decal Locations (1 of 2) 3P091-2409...
  • Page 13 TABLE OF CONTENTS SAFETY INFORMATION Figure 1-6: Decal Locations (2 of 2) 3P091-2409...
  • Page 14 TABLE OF CONTENTS SAFETY INFORMATION Table provided for general use. NOTES: 3P091-2409...
  • Page 15 Chapter 2 TABLE OF CONTENTS Assembly The Till 'N Seed® is shipped completely assembled. See After completion of final assembly, tighten all nuts evenly Figure 2-1. to prevent misalignment, distortion or binding. Tighten all screws and nuts to the recommended torques. CAUTION IMPORTANT Do not work on or under this machine unless...
  • Page 16 TABLE OF CONTENTS ASSEMBLY Acre Meter Installation - NOTE Optional Alignment of the Pick-Up Switch and Magnet Wheel Assembly is critical. Improper alignment will cause the The Acre Meter Kit consists of three main parts; Acre Acre Meter to record acres erratically or not at all. Meter, the Pick-Up Switch, and the Magnet Wheel 5.
  • Page 17 TABLE OF CONTENTS ASSEMBLY Acre Meter Assembly Adhesive Mount Base Acre Meter Assembly Magnet Wheel Asm Acre Meter Bracket Pick-Up Switch Acre Meter Angle Ground Wire Screw,#6-32 x 1/2" Nut,#8-32 Pick-Up Switch Magnet WheelAsm Bolt, Set Screw 5/16-18 x 1 Ground Wire Acre Meter Angle Screw,#8-32 x 1-1/4"...
  • Page 18 TABLE OF CONTENTS ASSEMBLY Rear Roller Scraper - 3. Center each Scraper between a group of Roller Wheels and adjust the Scraper so that there is about Optional a 3/16" gap between the Scraper and Roller Wheels. Attach the Scrapers to the tube with 3/8-16 U-Bolts 1.
  • Page 19 Chapter 3 TABLE OF CONTENTS Operation DANGER DANGER DANGER DANGER Never allow anyone to ride on the Till 'N Seed® at All 3-PT Hitch mounted equipment must be any time. Allowing a person to ride on the machine lowered to the ground, when servicing or when can inflict serious personal injury or death to that equipment is idle.

  • Page 20: Operation

    TABLE OF CONTENTS OPERATION Tractor Preparation Attaching Tractor to Till 'N Seed The Till 'N Seed® is available as a 3-PT Hitch. 1. The Till 'N Seed is designed to be used with Category 1 or 2 Free Link, Category 1 or 2 Quick Hitch. See WARNING Figures 3-2 and 3-3.
  • Page 21 TABLE OF CONTENTS OPERATION Hairpin Cotter Clevis Pin Pin Ø3/4" 18" Lower Hitch Pin Klik Pin Klik Pin 26" Ref Ø7/8" Ø7/8" Category 1 Free Link Hairpin Cotter Bushing Ø1" Clevis Pin 24" Lower Hitch Pin Klik Pin Klik Pin 31 5/8"...
  • Page 22 TABLE OF CONTENTS OPERATION Bushing Ø1-1/4" Hairpin Cotter Clevis Pin 15" Lower Hitch Pin Klik Pin Klik Pin 26" Ref Bushing Bushing Ø1-7/16" Ø1-7/16" Category 1 Quick Hitch Bushing Ø1-1/4" Hairpin Cotter Clevis Pin 15" Lower Hitch Pin Klik Pin Klik Pin 31 5/8"...
  • Page 23 TABLE OF CONTENTS OPERATION Loosen Rockshaft Clamp Nut Rockshaft Lock Detent Pin enough to allow movement (Storage Position) Remove Rockshaft Lock Detent Pin Stand Pin Stand Raised Rockshaft Clamp Figure 3-4: Rockshaft Lock 3P091-2409...
  • Page 24 TABLE OF CONTENTS OPERATION Air Shock Decrease air pressure on soft ground and increase air pressure on hard ground. Decrease Air Shock pressure when the Firming Roller is DANGER DANGER pushing dirt or mud is sticking to the Firming Roller. Increasing Tillage Rotor Air Shock pressure, transfers •...

  • Page 25: Gauge Wheels

    TABLE OF CONTENTS OPERATION Gauge Wheels 1. Adjust Gauge Wheel by loosening the 5/8-11 Flange Nut on the Gauge Wheel Hub. Raise or lower the Gauge Wheels control the depth of the Tillage Rotor. Gauge Wheel in the Rotor Arm Gauge Wheel Mounting Slot as necessary.
  • Page 26 TABLE OF CONTENTS OPERATION Rotor Thrust Guide Thrust Guide on each side of the machine, should have 1/32" maximum clearance between Guide and Lower Frame Side Plates. See Figure 3-7. 1. Adjust by loosening Jam Nut and turning Adjusting Bolt. Both sides are adjusted in the same manner. 2.

  • Page 27: General Operation

    TABLE OF CONTENTS OPERATION General Operation • When planting very small seeds that need to be planted very shallow or on the surface, adjust the 1. The minimum horsepower requirement is 35 HP. This Gauge Wheels to raise the Tillage Rotor partially or will vary widely due to speed, moisture, and types of entirely out of the ground.
  • Page 28 TABLE OF CONTENTS OPERATION Adjusting Front Box Seed 2. Remove the Sprockets needed from the stored Sprockets. See Figure 3-11. Range 3. Remove Klik Pin from the Front Box Driven Sprocket and the Transmission Driver Sprocket. Change the Front Box drive ratio can be changed to get different Rate Sprockets accordingly and re-insert Klik Pin into the Ranges.

  • Page 29: Seed Rate Adjustment

    TABLE OF CONTENTS OPERATION Seed Rate Adjustment Seed Rate Charts are located inside the Seed Box Cover and in this manual. See Pages 3-14, 3-15, and 3-16. It should be used as a reference only. Because of seed WARNING variation, a more accurate rate can be determined by performing Calibration for Unlisted Seeds to calibrate •...
  • Page 30 TABLE OF CONTENTS OPERATION 2. To decrease the rate of seeding, loosen the inner close Seed Meters more than 1/8" for reduced output 5/8-11 Adjusting Hex Nut with supplied wrenches. when seed is in the Meters, you must turn the Seed Back the inner 5/8-11 Adjusting Hex Nut away from Shaft while making the adjustment to prevent damage the Spacer.
  • Page 31 TABLE OF CONTENTS OPERATION Front Large Meter Box - Calibrate unlisted seeds as 8. Re-Install Calibration Trough in Seeding Position. follows: See Figure 3-18. 1. Refer to the Seed Rate Chart on the Seed Box Cover to identify the lowest Transmission Range to achieve Sprockets Storage Rear Box 5/8"...
  • Page 32 TABLE OF CONTENTS OPERATION Large Meter Box Seed Chart Rates are intended as a guide only. Variations in size and cleanliness will affect rates. Calibrate desired seed for best results. Front Box 5K141 Seed Meters. (1 ACRE = 43,560 SQ. FT. = 6 FT wide x 1-3/8 mile.) See Figures 3-19 and 3-20.
  • Page 33 TABLE OF CONTENTS OPERATION Corn, (Bin Run) Frescue, Tall Millet Oats Ryegrass Sorghum Sudan Soybeans Turnips, Purple Top Wheat, Winter NOTES: (1) Low germination may occur due to shallow seeding depth for this seed Figure 3-20: Large Meter Box Seed Chart (2 of 2) NOTE Brillion assumes no liability pertaining to seeding rates achieved on this seeder.
  • Page 34 TABLE OF CONTENTS OPERATION Micro-Meter Box Seed Chart POUNDS PER ACRE POUNDS PER 1000 SQ FT INDICATOR SETTINGS Alfalfa 0.02 0.07 0.12 0.17 0.22 0.27 0.34 0.39 0.44 Birdsfoot Trefoil 0.03 0.08 0.14 0.20 0.26 0.33 0.39 0.44 0.50 Brassica 0.03 0.07 0.12...
  • Page 35 TABLE OF CONTENTS OPERATION Table provided for general use. NOTES: 3P091-2409 3-17...
  • Page 36 TABLE OF CONTENTS OPERATION Loup Acre Meter Kit - Total Acres Press the /FUNC button until the “TOTAL” LED is lit. Optional (After 05/15/2012) The digits indicate the acres covered since the total acre counter was cleared. IMPORTANT To clear the total acre count, press and hold the UP and Acre Meter is dust and splash resistant, under no DOWN buttons for two seconds.
  • Page 37 TABLE OF CONTENTS OPERATION Loup Acre Meter Kit - If the display shows “Ent”: You must enter your password using the UP and DOWN buttons. When your Optional (Before 05/15/2012) password is displayed, press the /FUNC button to test the password. If the password is correct, you will be able to change the acre counter settings.
  • Page 38 TABLE OF CONTENTS OPERATION Acre Meter Settings MODEL Pulses per 400 FT Width (Feet) SSPT604 SSP4 SSB4 SSP5 SSB5 SSP6 SSB6 SSP8 SSBP8 SSB8 SSP10 SSBP10 SS10 SSB10 10.0 SSP12 SSBP12 SS12 SSB12 12.0 SSP16 SS16 4610-16 16.0 SSP108 SS108 SSP110 SS110 10.0...
  • Page 39 TABLE OF CONTENTS OPERATION MODEL Pulses Width (Feet) SSPT604 SSP4 SSP5 SSP6 SSP8 SSP10 SS10 SSP12 SS12 SSP108 SS108 SSP110 SS110 SSP112 SS112 SSP208 SSP2081 SS208 SS2081 SSP210 SSP2101 SS210 SS2101 SSP212 SSP2121 SS212 SS2121 SSP308 SS308 SSP310 SS310 SSP312 SS312 SLP8 4147...

  • Page 40: Transporting On A Trailer

    TABLE OF CONTENTS OPERATION Transporting on a Trailer IMPORTANT 1. Lower the Till 'N Seed on a flat or even surface. 2. Adjust the tractor top link as necessary to align the LIFT FROM HERE ONLY Rockshaft Slot with the Frame Tab Hole. 3.
  • Page 41 TABLE OF CONTENTS OPERATION Transporting 8. Verify that SMV sign, reflectors, and Safety Decals are clearly visible and tractor lamps are functioning 1. Check and follow all federal, state, and local properly. requirements before transporting the Till 'N Seed. 9. Transport during daylight hours whenever possible. 2.
  • Page 42 TABLE OF CONTENTS OPERATION Table provided for general use. NOTES: 3-24 3P091-2409...

  • Page 43: General Torque Specifications

    Chapter 4 TABLE OF CONTENTS Maintenance General Torque Specifications LANDOLL SAE TORQUE SPECIFICATIONS (FOOT POUNDS) [ ] Indicates specifications for Prevailing Torque Nuts. FASTENER TORQUE SPECIFICATIONS (Rev. 23/04) This chart provides general torque specifications for UNF Size Grade 2 Grade 5...

  • Page 44: Maintenance

    TABLE OF CONTENTS MAINTENANCE Fasteners Lubricate with quality grease per recommended lubrication frequency intervals indicated or if machine is Before operating your Brillion machine, check all not used for an extended period. See Figure 4-3. hardware for tightness. Use the Tightening Torque Table •...
  • Page 45 TABLE OF CONTENTS MAINTENANCE Tillage Rotor Bearing Rockshaft Bearing Drive Rotor Bearing Firming Roller Rockshaft Bearing Link Turnbuckle Rockshaft Bearing Rockshaft Link Turnbuckle Firming Roller Bearing Drive Rotor Tillage Rotor Bearing Bearing Figure 4-3: Lubrication Intervals 3P091-2409...

  • Page 46: Adjustment Procedure

    TABLE OF CONTENTS MAINTENANCE Firming Roller Adjustment Drive and Tillage Rotors Adjustment After an initial run of 5-10 hours, check the Firming Roller Assembly to ensure that the wheels are tight to one another and that the Axle Clamps are tight. See IMPORTANT Figure 4-4.
  • Page 47 TABLE OF CONTENTS MAINTENANCE Slotted Hex Nut Roll Pin Drive Rotor Slotted Hex Nut Drive Rotor Roll Tillage Rotor Tillage Rotor Bearing Roll Pin Shield that covers Tillage Rotor end Slotted is not shown Hex Nut Tillage Rotor Roll Pin Shield that covers Tillage Rotor end Slotted...
  • Page 48 TABLE OF CONTENTS MAINTENANCE Table provided for general use. NOTES: 3P091-2409...
  • Page 49 TABLE OF CONTENTS MAINTENANCE Rotor Thrust Guide On each side of the machine, check the 1/32" maximum clearance between the Thrust Guide and Lower Frame Side Plate. WARNING 1. Adjust both sides of the machine by loosening the Jam Nut and turning the Adjusting Bolt. Support machine with blocks or stands when 2.

  • Page 50: Chain Tension

    TABLE OF CONTENTS MAINTENANCE Chain Tension Primary Drive Chain The #40 Primary Drive Chain is properly adjusted when it Rotor Drive Chain has 5/16" – 3/8" deflection across the sprockets. See Figure 4-8. The #80 Rotor Drive Chain is properly adjusted when it 1.
  • Page 51 TABLE OF CONTENTS MAINTENANCE #40 Small Seed Box Drive Chain #40 Small Seed Box Back Drive Chain Loosen Hex Nut 1/8" - 3/16" Deflection 1/8" - 3/16" Deflection Tension Idler Tension Idler Lossen 5/16" - 3/8" Hex Nut Deflection #40 Primary Drive Chain #40 Seed Box Drive Chain...
  • Page 52 TABLE OF CONTENTS MAINTENANCE Seed Meter Adjustment Adjusting Front Large Meter: Individual Large Seed Meter Cups can be adjusted as required. Adjustments can be made by loosening the IMPORTANT 1/4-20 x 5/8 Machine Screws that mount the Seed Meter Removed all seed out of the Front and Rear Seed Cup to the Seed Box and the 1/4-20 Nut that attaches the Boxes including the Seed Meters before adjusting the Seed Meter Support to the Seed Meter Cup.
  • Page 53 TABLE OF CONTENTS MAINTENANCE Inner Feed Shutoff Inner Feed Shutoff Adjusting Hex Adjusting Hex Nut,5/8-11 Indicator Large Nut,5/8-11 set to "0" Seed Cup Micro-Meter Indicator Spacer Seed Cup Spacer set to "0" Seed Shaft Feed Bearing Roll Indicator Bearing Seed Shaft Extension Outer Outer...
  • Page 54 TABLE OF CONTENTS MAINTENANCE Acre Meter Troubleshooting 3. Place the Acre Meter display in “Calibrate” mode by pressing the *(FUNC) key until the “P-WORD” indicator is lit and then press the up/down arrow keys IMPORTANT until the display shows 0 and the LED is blinking. Acre Meter is dust and splash resistant, under no Break the connection between the display and the circumstances should this unit be submerged in any...

  • Page 55: Maintenance Chart

    TABLE OF CONTENTS MAINTENANCE Maintenance Chart (Subject to change without notice) Initial Run-In 8 Hours 20 Hours Annually Storage Fasteners Grease Rockshaft Bearings Grease Rockshaft Link Grease Rotor and Roller Bearings Lubricate Roller Chains Adjust Roller Chain Tension Adjust Rotor Thrust Guide Tighten Rotor Blades and Roller Wheels **Clean Machine...
  • Page 56 TABLE OF CONTENTS MAINTENANCE Table provided for general use. NOTES: 4-14 3P091-2409...

  • Page 57: Specifications

    Chapter 5 TABLE OF CONTENTS Specifications Product Attributes BPSB 6 Approximate Weight (Empty) 2,120 lbs. (962 kg) Three Point Hitch Type Cat. I, II, Quick Attach, iMatch Compatible Tractor Horsepower Range 35 to 60 HP (26 to 45 kw) Tractor Lift Capacity Requirement 2,150 lbs.
  • Page 58 Instructions for Ordering Parts ** Repair parts must be ordered through an authorized dealer ** DEALER INSTRUCTIONS FOR ORDERING PARTS FROM LANDOLL PARTS DISTRIBUTION CENTER PHONE #: 800-423-4320 OR 785-562-5381 FAX #: 888-527-3909 ORDER ONLINE: Dealer.landoll.com DATA PLATE The Data Plate, which lists the model and serial number of the equipment, ®...
  • Page 59 Document Control Revision Log: Date Form # Improvement(s): Description and Comments 03/2011 3P091-311rev0511 New Release 09/2011 3P091-311rev0911 Updated, Incorporated Landoll Format 03/2013 3P091-311rev0313 Added New Acre Meter Data 01/2014 3P091-311rev0114 Added Patent Decal. Manufactured under Patent #8,590,632 08/2020 3P091-0820 Added Rear Roller Scraper Option...
  • Page 60 Equipment from Landoll Company, LLC is built to exacting standards ensured by ISO 9001:2015 registration at all Landoll manufacturing facilities. Till 'N Seed ® Models BPS6 and BPSB6 Operator’s Manual Re-Order Part Number 3P091 LANDOLL COMPANY, LLC 1900 North Street...

This manual is also suitable for:

Brillion till 'n seed bpsb6

Table of Contents