Live Memory Playback - JVC DR-M100S Instructions Manual

BASIC OPERATIONS ON DVD DECK
28
EN

Live Memory Playback

You can watch a recorded portion of a programme even before recording ends (Live Memory Playback), or watch other programmes
(Simultaneous Recording and Playback) while continuing to record onto the DVD-RAM disc.
(Recording screen)
To stop recording,
o
press .
Recording stops
Current playback point

(Live Memory Playback)

Recording start point
0 30 min
Currently elapsed recording time
To start Live Memory Playback,
I
press
beginning OR press
To stop Live Memory Playback,
To stop Live Memory Playback,
Current recording position
(Recording point)
Playback
Recording
continues
continues
1 hour
(Live Memory Playback screen)
to play back from the
w
reverse
skip a little.
o
press .
To clear, press
LIVE CHECK
.
(Playback and Live Check screen)
o
press .
Live Memory Playback
NOTES:
●
Live Memory Playback could be performed approximately
30 seconds after recording has started.
●
Although high-speed search up to approximately 30 seconds
before the current recording point is possible during Live Memory
Playback, once the current recording point is reached, the unit
resumes normal playback and maintains a delay of
approximately 30 seconds so that recording and playback can
continue.
●
When using Live Memory Playback during timer recording, the
unit remains turned on and playback continues even after the
end of the recording.
●
When using Live Memory Playback during timer recording,
playback is automatically stopped just before recording starts,
and then recording starts when the time arrives for the next timer
programme.
● It is impossible to perform ITR even if you press R during Live
Memory Playback. Press o to display the programme being
recorded, then perform ITR settings.
●
Playback may be paused for a moment during Live Memory
Playback, which does not interfere with recording.
●
When LIVE CHECK is pressed to display the picture currently
being recorded, the picture size may not be correct.
●
Live Memory Playback cannot be performed while recording the
source from DV input. (A pg. 54)
Checking the
picture currently
being recorded
Recording
picture picture
PR
To display, press
LIVE CHECK
.
PR