Scan Mode Set; Tray Lock; Child Lock; Interlaced Scan - JVC DR-M100S Instructions Manual

SUBSIDIARY SETTINGS
64
EN

Scan Mode Set

If you connect the unit and TV with Component Video Connection
(A pg. 11), you can select the scan mode from two modes:
Interlaced scan mode which is used in the conventional TV
system, and Progressive scan mode which enables reproduction
of higher-quality images.

8 Interlaced scan

In the conventional video system, a picture is shown on the display
monitor in two halves. The Interlaced scan system places lines of
the second half of the picture in-between lines of the first half of the
picture.

8 Progressive scan

Progressive scan displays all the horizontal lines of a picture at
one time, as a single frame. This system can convert the interlaced
video from DVD into progressive format for connection to a
progressive display. It dramatically increases the vertical
resolution.
ATTENTION:
●
Your TV needs to be compatible with Progressive.
●
Connect the unit and the TV using a component video cable.
●
Turn on the unit.
●
Turn on the TV and select an input mode such as EXT1.
1
Set AL-1 OUTPUTB to ACOMPONENTB. (A pg. 58)
2
Press PROGRESSIVE SCAN for 3 or more seconds.
●
Video output indicator (q) lights on the front display panel if
Progressive scan mode has been established. (A pg. 13)
●
Each press of PROGRESSIVE SCAN for 3 or more seconds
switches the scan mode.
NOTES:
●
Progressive scan video signal is output from the [COMPONENT
VIDEO OUT] connectors.
●
Interlaced scan mode is the setting at your purchase.
●
Interlaced scan mode might be suitable depending on video
material.
●
Scan mode cannot be set while menu screen is displayed.
PROGRESSIVE SCAN

Tray Lock

You can lock the disc tray to prohibit the unwanted disc ejection by
children.
To lock tray
When the unit is turned off, while holding o, press M on the unit.
ALOCKB appears on the front display panel and the disc tray is
locked.
To unlock tray
When the unit is turned off, while holding o, press M on the unit.
AUNLOCKB lights up on the front display panel.

Child Lock

You can disable the operations of this unit using the Child Lock
function.
●
Turn on the unit.
1
When the unit is turned on, press and hold DVD A on the
remote control for more than 10 seconds.
●
The unit turns off and enters into Child Lock mode.
●
When in Child Lock mode, ACLB will appear on the front display
panel indicating that Child Lock mode is engaged when an
attempt was made to operate buttons on the unit or remote
control.
2
Press and hold DVD A on the remote control for 10 or more
seconds.
●
Child Lock is released and the unit turns on.
When in Child Lock mode, pressing TIMERj on the remote
control during timer recording releases Child Lock and recording is
continued.
M o
RAM/RW