D-Link DWR-M905 Technical Support Setup Procedure

How do I factory reset my DWR-M905 4G Dual SIM LTE Router
Soft Reset:
1 From the device you want to connect to (smartphones, laptops, or computers). Connect
your DWR-M905 to either Wi-Fi or Ethernet. The default Wi-Fi network name (SSID) is D-
LINK2G-XXXX, with the password printed on the back of your router.
2 Once connected, open a web browser and type in the URL bar
enter.
You might see a "Privacy Error" or similar security warning. This happens because the
router uses a self-signed SSL certificate, which browsers may not recognize as secure.
Here's how to proceed:
- Click on Advanced at the bottom of the warning page.
- Then, select Continue to 192.168.0.1 (unsafe) to access the router's login page.
If you're hesitant to proceed due to security concerns, you can review the certificate
-
details to verify its issuer and confirm that it is associated with your router by following
the procedure below:
o Click the "Not Secure" icon or the padlock symbol (depending on your browser).
o View the certificate details to confirm it was issued by the D-Link manufacturer
You will be prompted to enter the username and password to access the router's settings.
3
The default username is admin and the password (printed on the device label)
Technical Support Setup Procedure
https://192.168.0.1 and hit