D-Link DWR-M930DS Technical Support Setup Procedure

How to factory reset my DWR-M930DS 4G Dual SIM LTE
If you cannot remember your router's administrator password or wireless network settings, you
may reset the DWR-M930DS to default settings.
Note: Resetting the router to factory default will erase the current configuration settings.
Soft Reset:
1 Connect to your DWR-M930DS through either Wi-Fi or Ethernet using a laptop, computer,
or smart phone). The default Wi-Fi network name (SSID) is D-LINK2G-XXXX, with the
password printed on the back of your router.
2 Once connected, open a web browser and type in the address bar
https://dlinkrouter.local
You will be prompted to enter the username and password to access the router's settings.
3
The default username is admin and the password (printed on the label at the back of
your router).
Note: If you have changed the password and cannot remember it, you will need to reset
the router to factory
4 Once logged in, navigate through the Management tab, then System Settings. Click on
Reset
Technical Support Setup Procedure
Router
defaults.
https://192.168.0.1 or